Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.23;

import "@openzeppelin/contracts/utils/ReentrancyGuard.sol";

import "../bridge/BridgeMessenger.sol";
import "../bridge/interfaces/IBridgeRouter.sol";
import "../bridge/libraries/Messages.sol";
import "./interfaces/IAddressOracle.sol";
import "./SpokeState.sol";

contract SpokeCommon is BridgeMessenger, SpokeState {
    constructor(
        address admin,
        IBridgeRouter bridgeRouter,
        uint16 hubChainId,
        bytes32 hubContractAddress,
        IAddressOracle addressOracle
    ) BridgeMessenger(bridgeRouter) SpokeState(admin, hubChainId, hubContractAddress, addressOracle) {}

    /**
     * @notice Create account
     * @param params The parameters for sending message to hub chain
     * @param accountId  account id to create
     * @param nonce The nonce used to generate the account id
     * @param refAccountId The account id referrer (use zero bytes if no referrer)
     */
    function createAccount(
        Messages.MessageParams memory params,
        bytes32 accountId,
        bytes4 nonce,
        bytes32 refAccountId
    ) external payable nonReentrant {
        _doOperation(params, Messages.Action.CreateAccount, accountId, abi.encodePacked(nonce, refAccountId));
    }

    /**
     * @notice Invite an address of the specified chain to account
     * @param params The parameters for sending message to hub chain
     * @param accountId The account id to invite the address to
     * @param chainId The chain id of the address to be invited
     * @param addr The address to invite
     * @param refAccountId The account id referrer (use zero bytes if no referrer)
     */
    function inviteAddress(
        Messages.MessageParams memory params,
        bytes32 accountId,
        uint16 chainId,
        bytes32 addr,
        bytes32 refAccountId
    ) external payable nonReentrant {
        _doOperation(params, Messages.Action.InviteAddress, accountId, abi.encodePacked(chainId, addr, refAccountId));
    }

    /**
     * @notice Accept invite to account (must be sent from chain-address pair accepting the invite)
     * @param params The parameters for sending message to hub chain
     * @param accountId The account id invited to
     */
    function acceptInviteAddress(
        Messages.MessageParams memory params,
        bytes32 accountId
    ) external payable nonReentrant {
        _doOperation(params, Messages.Action.AcceptInviteAddress, accountId, "");
    }

    /**
     * @notice Remove (or uninvite) an address of the specified chain from account
     * @param params The parameters for sending message to hub chain
     * @param accountId The account id to unregister the address from
     * @param chainId The chain id of the address to unregister
     */
    function unregisterAddress(
        Messages.MessageParams memory params,
        bytes32 accountId,
        uint16 chainId
    ) external payable nonReentrant {
        _doOperation(params, Messages.Action.UnregisterAddress, accountId, abi.encodePacked(chainId));
    }

    /**
     * @notice Delegate to address on hub chain to perform operations on account
     * @param params The parameters for sending message to hub chain
     * @param accountId The account id to add the delegate to
     * @param addr The delegate address
     */
    function addDelegate(
        Messages.MessageParams memory params,
        bytes32 accountId,
        bytes32 addr
    ) external payable nonReentrant {
        _doOperation(params, Messages.Action.AddDelegate, accountId, abi.encodePacked(addr));
    }

    /**
     * @notice Remove delegate to address on hub chain to perform operations on account
     * @param params The parameters for sending message to hub chain
     * @param accountId The account id to remove the delegate from
     * @param addr The delegate address
     */
    function removeDelegate(
        Messages.MessageParams memory params,
        bytes32 accountId,
        bytes32 addr
    ) external payable nonReentrant {
        _doOperation(params, Messages.Action.RemoveDelegate, accountId, abi.encodePacked(addr));
    }

    /**
     * @notice Create loan (alternative is to use "create loan and deposit" method)
     * @param params The parameters for sending message to hub chain
     * @param accountId The account id to create the loan in
     * @param nonce The nonce used to generate the loan id
     * @param loanTypeId The load type to create
     * @param loanName The loan name to help identify the loan to user
     */
    function createLoan(
        Messages.MessageParams memory params,
        bytes32 accountId,
        bytes4 nonce,
        uint16 loanTypeId,
        bytes32 loanName
    ) external payable nonReentrant {
        _doOperation(params, Messages.Action.CreateLoan, accountId, abi.encodePacked(nonce, loanTypeId, loanName));
    }

    /**
     * @notice Delete loan
     * @param params The parameters for sending message to hub chain
     * @param accountId The account id of the loan to delete
     * @param loanId The load id to delete
     */
    function deleteLoan(
        Messages.MessageParams memory params,
        bytes32 accountId,
        bytes32 loanId
    ) external payable nonReentrant {
        _doOperation(params, Messages.Action.DeleteLoan, accountId, abi.encodePacked(loanId));
    }

    /**
     * @notice Withdraw token to registered address of specified chain
     * @param params The parameters for sending message to hub chain
     * @param accountId The account id of the loan
     * @param loanId The loan id to withdraw from
     * @param poolId The pool id for the token to withdraw
     * @param chainId The chain id to receive the funds on (must be compatible with token)
     * @param amount The amount to withdraw
     * @param isFAmount Whether the amount is denominated in the f token or underlying token
     */
    function withdraw(
        Messages.MessageParams memory params,
        bytes32 accountId,
        bytes32 loanId,
        uint8 poolId,
        uint16 chainId,
        uint256 amount,
        bool isFAmount
    ) external payable nonReentrant {
        _doOperation(
            params,
            Messages.Action.Withdraw,
            accountId,
            abi.encodePacked(loanId, poolId, chainId, amount, isFAmount)
        );
    }

    /**
     * @notice Borrow token to registered address of specified chain
     * @param params The parameters for sending message to hub chain
     * @param accountId The account id of the loan
     * @param loanId The loan id to borrow using
     * @param poolId The pool id for the token to borrow
     * @param chainId The chain id to receive the funds on (must be compatible with token)
     * @param amount The amount to borrow
     * @param maxStableRate The max stable rate - if zero then is interpreted as variable borrow
     */
    function borrow(
        Messages.MessageParams memory params,
        bytes32 accountId,
        bytes32 loanId,
        uint8 poolId,
        uint16 chainId,
        uint256 amount,
        uint256 maxStableRate
    ) external payable nonReentrant {
        _doOperation(
            params,
            Messages.Action.Borrow,
            accountId,
            abi.encodePacked(loanId, poolId, chainId, amount, maxStableRate)
        );
    }

    /**
     * @notice Repay borrow in specified loan using existing collateral
     * @param params The parameters for sending message to hub chain
     * @param accountId The account id of the loan
     * @param loanId The loan id to repay in
     * @param poolId The pool id for the token to repay
     * @param amount The amount to repay
     */
    function repayWithCollateral(
        Messages.MessageParams memory params,
        bytes32 accountId,
        bytes32 loanId,
        uint8 poolId,
        uint256 amount
    ) external payable nonReentrant {
        _doOperation(params, Messages.Action.RepayWithCollateral, accountId, abi.encodePacked(loanId, poolId, amount));
    }

    /**
     * @notice Switch borrow type of specified borrow
     * @param params The parameters for sending message to hub chain
     * @param accountId The account id of the loan
     * @param loanId The loan id the borrow is on
     * @param poolId The pool id the borrow is on
     * @param maxStableRate The max stable rate - if zero then interpreted as switching a stable to variable borrow
     */
    function switchBorrowType(
        Messages.MessageParams memory params,
        bytes32 accountId,
        bytes32 loanId,
        uint8 poolId,
        uint256 maxStableRate
    ) external payable nonReentrant {
        _doOperation(
            params,
            Messages.Action.SwitchBorrowType,
            accountId,
            abi.encodePacked(loanId, poolId, maxStableRate)
        );
    }

    function _doOperation(
        Messages.MessageParams memory params,
        Messages.Action action,
        bytes32 accountId,
        bytes memory data
    ) internal {
        // check sender is eligible to do given action
        if (!_addressOracle.isEligible(msg.sender, uint16(action)))
            revert IAddressOracle.AddressIneligible(msg.sender, uint16(action));

        // construct message
        Messages.MessageToSend memory message = Messages.MessageToSend({
            params: params,
            sender: Messages.convertEVMAddressToGenericAddress(address(this)),
            destinationChainId: _hub.chainId,
            handler: _hub.contractAddress,
            payload: Messages.encodeMessagePayload(
                Messages.MessagePayload({
                    action: action,
                    accountId: accountId,
                    userAddress: Messages.convertEVMAddressToGenericAddress(msg.sender),
                    data: data
                })
            ),
            finalityLevel: 0, // immediate
            extraArgs: ""
        });

        // send message
        _sendMessage(message, msg.value);
    }

    function _receiveMessage(Messages.MessageReceived memory message) internal pure override {
        revert CannotReceiveMessage(message.messageId);
    }

    function _retryMessage(Messages.MessageReceived memory message, address, bytes memory) internal pure override {
        revert CannotRetryMessage(message.messageId);
    }

    function _reverseMessage(Messages.MessageReceived memory message, address, bytes memory) internal pure override {
        revert CannotReverseMessage(message.messageId);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (access/AccessControl.sol)

pragma solidity ^0.8.20;

import {IAccessControl} from "./IAccessControl.sol";
import {Context} from "../utils/Context.sol";
import {ERC165} from "../utils/introspection/ERC165.sol";

/**
 * @dev Contract module that allows children to implement role-based access
 * control mechanisms. This is a lightweight version that doesn't allow enumerating role
 * members except through off-chain means by accessing the contract event logs. Some
 * applications may benefit from on-chain enumerability, for those cases see
 * {AccessControlEnumerable}.
 *
 * Roles are referred to by their `bytes32` identifier. These should be exposed
 * in the external API and be unique. The best way to achieve this is by
 * using `public constant` hash digests:
 *
 * ```solidity
 * bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
 * ```
 *
 * Roles can be used to represent a set of permissions. To restrict access to a
 * function call, use {hasRole}:
 *
 * ```solidity
 * function foo() public {
 *     require(hasRole(MY_ROLE, msg.sender));
 *     ...
 * }
 * ```
 *
 * Roles can be granted and revoked dynamically via the {grantRole} and
 * {revokeRole} functions. Each role has an associated admin role, and only
 * accounts that have a role's admin role can call {grantRole} and {revokeRole}.
 *
 * By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
 * that only accounts with this role will be able to grant or revoke other
 * roles. More complex role relationships can be created by using
 * {_setRoleAdmin}.
 *
 * WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to
 * grant and revoke this role. Extra precautions should be taken to secure
 * accounts that have been granted it. We recommend using {AccessControlDefaultAdminRules}
 * to enforce additional security measures for this role.
 */
abstract contract AccessControl is Context, IAccessControl, ERC165 {
    struct RoleData {
        mapping(address account => bool) hasRole;
        bytes32 adminRole;
    }

    mapping(bytes32 role => RoleData) private _roles;

    bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;

    /**
     * @dev Modifier that checks that an account has a specific role. Reverts
     * with an {AccessControlUnauthorizedAccount} error including the required role.
     */
    modifier onlyRole(bytes32 role) {
        _checkRole(role);
        _;
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IAccessControl).interfaceId || super.supportsInterface(interfaceId);
    }

    /**
     * @dev Returns `true` if `account` has been granted `role`.
     */
    function hasRole(bytes32 role, address account) public view virtual returns (bool) {
        return _roles[role].hasRole[account];
    }

    /**
     * @dev Reverts with an {AccessControlUnauthorizedAccount} error if `_msgSender()`
     * is missing `role`. Overriding this function changes the behavior of the {onlyRole} modifier.
     */
    function _checkRole(bytes32 role) internal view virtual {
        _checkRole(role, _msgSender());
    }

    /**
     * @dev Reverts with an {AccessControlUnauthorizedAccount} error if `account`
     * is missing `role`.
     */
    function _checkRole(bytes32 role, address account) internal view virtual {
        if (!hasRole(role, account)) {
            revert AccessControlUnauthorizedAccount(account, role);
        }
    }

    /**
     * @dev Returns the admin role that controls `role`. See {grantRole} and
     * {revokeRole}.
     *
     * To change a role's admin, use {_setRoleAdmin}.
     */
    function getRoleAdmin(bytes32 role) public view virtual returns (bytes32) {
        return _roles[role].adminRole;
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     *
     * May emit a {RoleGranted} event.
     */
    function grantRole(bytes32 role, address account) public virtual onlyRole(getRoleAdmin(role)) {
        _grantRole(role, account);
    }

    /**
     * @dev Revokes `role` from `account`.
     *
     * If `account` had been granted `role`, emits a {RoleRevoked} event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     *
     * May emit a {RoleRevoked} event.
     */
    function revokeRole(bytes32 role, address account) public virtual onlyRole(getRoleAdmin(role)) {
        _revokeRole(role, account);
    }

    /**
     * @dev Revokes `role` from the calling account.
     *
     * Roles are often managed via {grantRole} and {revokeRole}: this function's
     * purpose is to provide a mechanism for accounts to lose their privileges
     * if they are compromised (such as when a trusted device is misplaced).
     *
     * If the calling account had been revoked `role`, emits a {RoleRevoked}
     * event.
     *
     * Requirements:
     *
     * - the caller must be `callerConfirmation`.
     *
     * May emit a {RoleRevoked} event.
     */
    function renounceRole(bytes32 role, address callerConfirmation) public virtual {
        if (callerConfirmation != _msgSender()) {
            revert AccessControlBadConfirmation();
        }

        _revokeRole(role, callerConfirmation);
    }

    /**
     * @dev Sets `adminRole` as ``role``'s admin role.
     *
     * Emits a {RoleAdminChanged} event.
     */
    function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
        bytes32 previousAdminRole = getRoleAdmin(role);
        _roles[role].adminRole = adminRole;
        emit RoleAdminChanged(role, previousAdminRole, adminRole);
    }

    /**
     * @dev Attempts to grant `role` to `account` and returns a boolean indicating if `role` was granted.
     *
     * Internal function without access restriction.
     *
     * May emit a {RoleGranted} event.
     */
    function _grantRole(bytes32 role, address account) internal virtual returns (bool) {
        if (!hasRole(role, account)) {
            _roles[role].hasRole[account] = true;
            emit RoleGranted(role, account, _msgSender());
            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Attempts to revoke `role` to `account` and returns a boolean indicating if `role` was revoked.
     *
     * Internal function without access restriction.
     *
     * May emit a {RoleRevoked} event.
     */
    function _revokeRole(bytes32 role, address account) internal virtual returns (bool) {
        if (hasRole(role, account)) {
            _roles[role].hasRole[account] = false;
            emit RoleRevoked(role, account, _msgSender());
            return true;
        } else {
            return false;
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (access/extensions/AccessControlDefaultAdminRules.sol)

pragma solidity ^0.8.20;

import {IAccessControlDefaultAdminRules} from "./IAccessControlDefaultAdminRules.sol";
import {AccessControl, IAccessControl} from "../AccessControl.sol";
import {SafeCast} from "../../utils/math/SafeCast.sol";
import {Math} from "../../utils/math/Math.sol";
import {IERC5313} from "../../interfaces/IERC5313.sol";

/**
 * @dev Extension of {AccessControl} that allows specifying special rules to manage
 * the `DEFAULT_ADMIN_ROLE` holder, which is a sensitive role with special permissions
 * over other roles that may potentially have privileged rights in the system.
 *
 * If a specific role doesn't have an admin role assigned, the holder of the
 * `DEFAULT_ADMIN_ROLE` will have the ability to grant it and revoke it.
 *
 * This contract implements the following risk mitigations on top of {AccessControl}:
 *
 * * Only one account holds the `DEFAULT_ADMIN_ROLE` since deployment until it's potentially renounced.
 * * Enforces a 2-step process to transfer the `DEFAULT_ADMIN_ROLE` to another account.
 * * Enforces a configurable delay between the two steps, with the ability to cancel before the transfer is accepted.
 * * The delay can be changed by scheduling, see {changeDefaultAdminDelay}.
 * * It is not possible to use another role to manage the `DEFAULT_ADMIN_ROLE`.
 *
 * Example usage:
 *
 * ```solidity
 * contract MyToken is AccessControlDefaultAdminRules {
 *   constructor() AccessControlDefaultAdminRules(
 *     3 days,
 *     msg.sender // Explicit initial `DEFAULT_ADMIN_ROLE` holder
 *    ) {}
 * }
 * ```
 */
abstract contract AccessControlDefaultAdminRules is IAccessControlDefaultAdminRules, IERC5313, AccessControl {
    // pending admin pair read/written together frequently
    address private _pendingDefaultAdmin;
    uint48 private _pendingDefaultAdminSchedule; // 0 == unset

    uint48 private _currentDelay;
    address private _currentDefaultAdmin;

    // pending delay pair read/written together frequently
    uint48 private _pendingDelay;
    uint48 private _pendingDelaySchedule; // 0 == unset

    /**
     * @dev Sets the initial values for {defaultAdminDelay} and {defaultAdmin} address.
     */
    constructor(uint48 initialDelay, address initialDefaultAdmin) {
        if (initialDefaultAdmin == address(0)) {
            revert AccessControlInvalidDefaultAdmin(address(0));
        }
        _currentDelay = initialDelay;
        _grantRole(DEFAULT_ADMIN_ROLE, initialDefaultAdmin);
    }

    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
        return interfaceId == type(IAccessControlDefaultAdminRules).interfaceId || super.supportsInterface(interfaceId);
    }

    /**
     * @dev See {IERC5313-owner}.
     */
    function owner() public view virtual returns (address) {
        return defaultAdmin();
    }

    ///
    /// Override AccessControl role management
    ///

    /**
     * @dev See {AccessControl-grantRole}. Reverts for `DEFAULT_ADMIN_ROLE`.
     */
    function grantRole(bytes32 role, address account) public virtual override(AccessControl, IAccessControl) {
        if (role == DEFAULT_ADMIN_ROLE) {
            revert AccessControlEnforcedDefaultAdminRules();
        }
        super.grantRole(role, account);
    }

    /**
     * @dev See {AccessControl-revokeRole}. Reverts for `DEFAULT_ADMIN_ROLE`.
     */
    function revokeRole(bytes32 role, address account) public virtual override(AccessControl, IAccessControl) {
        if (role == DEFAULT_ADMIN_ROLE) {
            revert AccessControlEnforcedDefaultAdminRules();
        }
        super.revokeRole(role, account);
    }

    /**
     * @dev See {AccessControl-renounceRole}.
     *
     * For the `DEFAULT_ADMIN_ROLE`, it only allows renouncing in two steps by first calling
     * {beginDefaultAdminTransfer} to the `address(0)`, so it's required that the {pendingDefaultAdmin} schedule
     * has also passed when calling this function.
     *
     * After its execution, it will not be possible to call `onlyRole(DEFAULT_ADMIN_ROLE)` functions.
     *
     * NOTE: Renouncing `DEFAULT_ADMIN_ROLE` will leave the contract without a {defaultAdmin},
     * thereby disabling any functionality that is only available for it, and the possibility of reassigning a
     * non-administrated role.
     */
    function renounceRole(bytes32 role, address account) public virtual override(AccessControl, IAccessControl) {
        if (role == DEFAULT_ADMIN_ROLE && account == defaultAdmin()) {
            (address newDefaultAdmin, uint48 schedule) = pendingDefaultAdmin();
            if (newDefaultAdmin != address(0) || !_isScheduleSet(schedule) || !_hasSchedulePassed(schedule)) {
                revert AccessControlEnforcedDefaultAdminDelay(schedule);
            }
            delete _pendingDefaultAdminSchedule;
        }
        super.renounceRole(role, account);
    }

    /**
     * @dev See {AccessControl-_grantRole}.
     *
     * For `DEFAULT_ADMIN_ROLE`, it only allows granting if there isn't already a {defaultAdmin} or if the
     * role has been previously renounced.
     *
     * NOTE: Exposing this function through another mechanism may make the `DEFAULT_ADMIN_ROLE`
     * assignable again. Make sure to guarantee this is the expected behavior in your implementation.
     */
    function _grantRole(bytes32 role, address account) internal virtual override returns (bool) {
        if (role == DEFAULT_ADMIN_ROLE) {
            if (defaultAdmin() != address(0)) {
                revert AccessControlEnforcedDefaultAdminRules();
            }
            _currentDefaultAdmin = account;
        }
        return super._grantRole(role, account);
    }

    /**
     * @dev See {AccessControl-_revokeRole}.
     */
    function _revokeRole(bytes32 role, address account) internal virtual override returns (bool) {
        if (role == DEFAULT_ADMIN_ROLE && account == defaultAdmin()) {
            delete _currentDefaultAdmin;
        }
        return super._revokeRole(role, account);
    }

    /**
     * @dev See {AccessControl-_setRoleAdmin}. Reverts for `DEFAULT_ADMIN_ROLE`.
     */
    function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual override {
        if (role == DEFAULT_ADMIN_ROLE) {
            revert AccessControlEnforcedDefaultAdminRules();
        }
        super._setRoleAdmin(role, adminRole);
    }

    ///
    /// AccessControlDefaultAdminRules accessors
    ///

    /**
     * @inheritdoc IAccessControlDefaultAdminRules
     */
    function defaultAdmin() public view virtual returns (address) {
        return _currentDefaultAdmin;
    }

    /**
     * @inheritdoc IAccessControlDefaultAdminRules
     */
    function pendingDefaultAdmin() public view virtual returns (address newAdmin, uint48 schedule) {
        return (_pendingDefaultAdmin, _pendingDefaultAdminSchedule);
    }

    /**
     * @inheritdoc IAccessControlDefaultAdminRules
     */
    function defaultAdminDelay() public view virtual returns (uint48) {
        uint48 schedule = _pendingDelaySchedule;
        return (_isScheduleSet(schedule) && _hasSchedulePassed(schedule)) ? _pendingDelay : _currentDelay;
    }

    /**
     * @inheritdoc IAccessControlDefaultAdminRules
     */
    function pendingDefaultAdminDelay() public view virtual returns (uint48 newDelay, uint48 schedule) {
        schedule = _pendingDelaySchedule;
        return (_isScheduleSet(schedule) && !_hasSchedulePassed(schedule)) ? (_pendingDelay, schedule) : (0, 0);
    }

    /**
     * @inheritdoc IAccessControlDefaultAdminRules
     */
    function defaultAdminDelayIncreaseWait() public view virtual returns (uint48) {
        return 5 days;
    }

    ///
    /// AccessControlDefaultAdminRules public and internal setters for defaultAdmin/pendingDefaultAdmin
    ///

    /**
     * @inheritdoc IAccessControlDefaultAdminRules
     */
    function beginDefaultAdminTransfer(address newAdmin) public virtual onlyRole(DEFAULT_ADMIN_ROLE) {
        _beginDefaultAdminTransfer(newAdmin);
    }

    /**
     * @dev See {beginDefaultAdminTransfer}.
     *
     * Internal function without access restriction.
     */
    function _beginDefaultAdminTransfer(address newAdmin) internal virtual {
        uint48 newSchedule = SafeCast.toUint48(block.timestamp) + defaultAdminDelay();
        _setPendingDefaultAdmin(newAdmin, newSchedule);
        emit DefaultAdminTransferScheduled(newAdmin, newSchedule);
    }

    /**
     * @inheritdoc IAccessControlDefaultAdminRules
     */
    function cancelDefaultAdminTransfer() public virtual onlyRole(DEFAULT_ADMIN_ROLE) {
        _cancelDefaultAdminTransfer();
    }

    /**
     * @dev See {cancelDefaultAdminTransfer}.
     *
     * Internal function without access restriction.
     */
    function _cancelDefaultAdminTransfer() internal virtual {
        _setPendingDefaultAdmin(address(0), 0);
    }

    /**
     * @inheritdoc IAccessControlDefaultAdminRules
     */
    function acceptDefaultAdminTransfer() public virtual {
        (address newDefaultAdmin, ) = pendingDefaultAdmin();
        if (_msgSender() != newDefaultAdmin) {
            // Enforce newDefaultAdmin explicit acceptance.
            revert AccessControlInvalidDefaultAdmin(_msgSender());
        }
        _acceptDefaultAdminTransfer();
    }

    /**
     * @dev See {acceptDefaultAdminTransfer}.
     *
     * Internal function without access restriction.
     */
    function _acceptDefaultAdminTransfer() internal virtual {
        (address newAdmin, uint48 schedule) = pendingDefaultAdmin();
        if (!_isScheduleSet(schedule) || !_hasSchedulePassed(schedule)) {
            revert AccessControlEnforcedDefaultAdminDelay(schedule);
        }
        _revokeRole(DEFAULT_ADMIN_ROLE, defaultAdmin());
        _grantRole(DEFAULT_ADMIN_ROLE, newAdmin);
        delete _pendingDefaultAdmin;
        delete _pendingDefaultAdminSchedule;
    }

    ///
    /// AccessControlDefaultAdminRules public and internal setters for defaultAdminDelay/pendingDefaultAdminDelay
    ///

    /**
     * @inheritdoc IAccessControlDefaultAdminRules
     */
    function changeDefaultAdminDelay(uint48 newDelay) public virtual onlyRole(DEFAULT_ADMIN_ROLE) {
        _changeDefaultAdminDelay(newDelay);
    }

    /**
     * @dev See {changeDefaultAdminDelay}.
     *
     * Internal function without access restriction.
     */
    function _changeDefaultAdminDelay(uint48 newDelay) internal virtual {
        uint48 newSchedule = SafeCast.toUint48(block.timestamp) + _delayChangeWait(newDelay);
        _setPendingDelay(newDelay, newSchedule);
        emit DefaultAdminDelayChangeScheduled(newDelay, newSchedule);
    }

    /**
     * @inheritdoc IAccessControlDefaultAdminRules
     */
    function rollbackDefaultAdminDelay() public virtual onlyRole(DEFAULT_ADMIN_ROLE) {
        _rollbackDefaultAdminDelay();
    }

    /**
     * @dev See {rollbackDefaultAdminDelay}.
     *
     * Internal function without access restriction.
     */
    function _rollbackDefaultAdminDelay() internal virtual {
        _setPendingDelay(0, 0);
    }

    /**
     * @dev Returns the amount of seconds to wait after the `newDelay` will
     * become the new {defaultAdminDelay}.
     *
     * The value returned guarantees that if the delay is reduced, it will go into effect
     * after a wait that honors the previously set delay.
     *
     * See {defaultAdminDelayIncreaseWait}.
     */
    function _delayChangeWait(uint48 newDelay) internal view virtual returns (uint48) {
        uint48 currentDelay = defaultAdminDelay();

        // When increasing the delay, we schedule the delay change to occur after a period of "new delay" has passed, up
        // to a maximum given by defaultAdminDelayIncreaseWait, by default 5 days. For example, if increasing from 1 day
        // to 3 days, the new delay will come into effect after 3 days. If increasing from 1 day to 10 days, the new
        // delay will come into effect after 5 days. The 5 day wait period is intended to be able to fix an error like
        // using milliseconds instead of seconds.
        //
        // When decreasing the delay, we wait the difference between "current delay" and "new delay". This guarantees
        // that an admin transfer cannot be made faster than "current delay" at the time the delay change is scheduled.
        // For example, if decreasing from 10 days to 3 days, the new delay will come into effect after 7 days.
        return
            newDelay > currentDelay
                ? uint48(Math.min(newDelay, defaultAdminDelayIncreaseWait())) // no need to safecast, both inputs are uint48
                : currentDelay - newDelay;
    }

    ///
    /// Private setters
    ///

    /**
     * @dev Setter of the tuple for pending admin and its schedule.
     *
     * May emit a DefaultAdminTransferCanceled event.
     */
    function _setPendingDefaultAdmin(address newAdmin, uint48 newSchedule) private {
        (, uint48 oldSchedule) = pendingDefaultAdmin();

        _pendingDefaultAdmin = newAdmin;
        _pendingDefaultAdminSchedule = newSchedule;

        // An `oldSchedule` from `pendingDefaultAdmin()` is only set if it hasn't been accepted.
        if (_isScheduleSet(oldSchedule)) {
            // Emit for implicit cancellations when another default admin was scheduled.
            emit DefaultAdminTransferCanceled();
        }
    }

    /**
     * @dev Setter of the tuple for pending delay and its schedule.
     *
     * May emit a DefaultAdminDelayChangeCanceled event.
     */
    function _setPendingDelay(uint48 newDelay, uint48 newSchedule) private {
        uint48 oldSchedule = _pendingDelaySchedule;

        if (_isScheduleSet(oldSchedule)) {
            if (_hasSchedulePassed(oldSchedule)) {
                // Materialize a virtual delay
                _currentDelay = _pendingDelay;
            } else {
                // Emit for implicit cancellations when another delay was scheduled.
                emit DefaultAdminDelayChangeCanceled();
            }
        }

        _pendingDelay = newDelay;
        _pendingDelaySchedule = newSchedule;
    }

    ///
    /// Private helpers
    ///

    /**
     * @dev Defines if an `schedule` is considered set. For consistency purposes.
     */
    function _isScheduleSet(uint48 schedule) private pure returns (bool) {
        return schedule != 0;
    }

    /**
     * @dev Defines if an `schedule` is considered passed. For consistency purposes.
     */
    function _hasSchedulePassed(uint48 schedule) private view returns (bool) {
        return schedule < block.timestamp;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (access/extensions/IAccessControlDefaultAdminRules.sol)

pragma solidity ^0.8.20;

import {IAccessControl} from "../IAccessControl.sol";

/**
 * @dev External interface of AccessControlDefaultAdminRules declared to support ERC165 detection.
 */
interface IAccessControlDefaultAdminRules is IAccessControl {
    /**
     * @dev The new default admin is not a valid default admin.
     */
    error AccessControlInvalidDefaultAdmin(address defaultAdmin);

    /**
     * @dev At least one of the following rules was violated:
     *
     * - The `DEFAULT_ADMIN_ROLE` must only be managed by itself.
     * - The `DEFAULT_ADMIN_ROLE` must only be held by one account at the time.
     * - Any `DEFAULT_ADMIN_ROLE` transfer must be in two delayed steps.
     */
    error AccessControlEnforcedDefaultAdminRules();

    /**
     * @dev The delay for transferring the default admin delay is enforced and
     * the operation must wait until `schedule`.
     *
     * NOTE: `schedule` can be 0 indicating there's no transfer scheduled.
     */
    error AccessControlEnforcedDefaultAdminDelay(uint48 schedule);

    /**
     * @dev Emitted when a {defaultAdmin} transfer is started, setting `newAdmin` as the next
     * address to become the {defaultAdmin} by calling {acceptDefaultAdminTransfer} only after `acceptSchedule`
     * passes.
     */
    event DefaultAdminTransferScheduled(address indexed newAdmin, uint48 acceptSchedule);

    /**
     * @dev Emitted when a {pendingDefaultAdmin} is reset if it was never accepted, regardless of its schedule.
     */
    event DefaultAdminTransferCanceled();

    /**
     * @dev Emitted when a {defaultAdminDelay} change is started, setting `newDelay` as the next
     * delay to be applied between default admin transfer after `effectSchedule` has passed.
     */
    event DefaultAdminDelayChangeScheduled(uint48 newDelay, uint48 effectSchedule);

    /**
     * @dev Emitted when a {pendingDefaultAdminDelay} is reset if its schedule didn't pass.
     */
    event DefaultAdminDelayChangeCanceled();

    /**
     * @dev Returns the address of the current `DEFAULT_ADMIN_ROLE` holder.
     */
    function defaultAdmin() external view returns (address);

    /**
     * @dev Returns a tuple of a `newAdmin` and an accept schedule.
     *
     * After the `schedule` passes, the `newAdmin` will be able to accept the {defaultAdmin} role
     * by calling {acceptDefaultAdminTransfer}, completing the role transfer.
     *
     * A zero value only in `acceptSchedule` indicates no pending admin transfer.
     *
     * NOTE: A zero address `newAdmin` means that {defaultAdmin} is being renounced.
     */
    function pendingDefaultAdmin() external view returns (address newAdmin, uint48 acceptSchedule);

    /**
     * @dev Returns the delay required to schedule the acceptance of a {defaultAdmin} transfer started.
     *
     * This delay will be added to the current timestamp when calling {beginDefaultAdminTransfer} to set
     * the acceptance schedule.
     *
     * NOTE: If a delay change has been scheduled, it will take effect as soon as the schedule passes, making this
     * function returns the new delay. See {changeDefaultAdminDelay}.
     */
    function defaultAdminDelay() external view returns (uint48);

    /**
     * @dev Returns a tuple of `newDelay` and an effect schedule.
     *
     * After the `schedule` passes, the `newDelay` will get into effect immediately for every
     * new {defaultAdmin} transfer started with {beginDefaultAdminTransfer}.
     *
     * A zero value only in `effectSchedule` indicates no pending delay change.
     *
     * NOTE: A zero value only for `newDelay` means that the next {defaultAdminDelay}
     * will be zero after the effect schedule.
     */
    function pendingDefaultAdminDelay() external view returns (uint48 newDelay, uint48 effectSchedule);

    /**
     * @dev Starts a {defaultAdmin} transfer by setting a {pendingDefaultAdmin} scheduled for acceptance
     * after the current timestamp plus a {defaultAdminDelay}.
     *
     * Requirements:
     *
     * - Only can be called by the current {defaultAdmin}.
     *
     * Emits a DefaultAdminRoleChangeStarted event.
     */
    function beginDefaultAdminTransfer(address newAdmin) external;

    /**
     * @dev Cancels a {defaultAdmin} transfer previously started with {beginDefaultAdminTransfer}.
     *
     * A {pendingDefaultAdmin} not yet accepted can also be cancelled with this function.
     *
     * Requirements:
     *
     * - Only can be called by the current {defaultAdmin}.
     *
     * May emit a DefaultAdminTransferCanceled event.
     */
    function cancelDefaultAdminTransfer() external;

    /**
     * @dev Completes a {defaultAdmin} transfer previously started with {beginDefaultAdminTransfer}.
     *
     * After calling the function:
     *
     * - `DEFAULT_ADMIN_ROLE` should be granted to the caller.
     * - `DEFAULT_ADMIN_ROLE` should be revoked from the previous holder.
     * - {pendingDefaultAdmin} should be reset to zero values.
     *
     * Requirements:
     *
     * - Only can be called by the {pendingDefaultAdmin}'s `newAdmin`.
     * - The {pendingDefaultAdmin}'s `acceptSchedule` should've passed.
     */
    function acceptDefaultAdminTransfer() external;

    /**
     * @dev Initiates a {defaultAdminDelay} update by setting a {pendingDefaultAdminDelay} scheduled for getting
     * into effect after the current timestamp plus a {defaultAdminDelay}.
     *
     * This function guarantees that any call to {beginDefaultAdminTransfer} done between the timestamp this
     * method is called and the {pendingDefaultAdminDelay} effect schedule will use the current {defaultAdminDelay}
     * set before calling.
     *
     * The {pendingDefaultAdminDelay}'s effect schedule is defined in a way that waiting until the schedule and then
     * calling {beginDefaultAdminTransfer} with the new delay will take at least the same as another {defaultAdmin}
     * complete transfer (including acceptance).
     *
     * The schedule is designed for two scenarios:
     *
     * - When the delay is changed for a larger one the schedule is `block.timestamp + newDelay` capped by
     * {defaultAdminDelayIncreaseWait}.
     * - When the delay is changed for a shorter one, the schedule is `block.timestamp + (current delay - new delay)`.
     *
     * A {pendingDefaultAdminDelay} that never got into effect will be canceled in favor of a new scheduled change.
     *
     * Requirements:
     *
     * - Only can be called by the current {defaultAdmin}.
     *
     * Emits a DefaultAdminDelayChangeScheduled event and may emit a DefaultAdminDelayChangeCanceled event.
     */
    function changeDefaultAdminDelay(uint48 newDelay) external;

    /**
     * @dev Cancels a scheduled {defaultAdminDelay} change.
     *
     * Requirements:
     *
     * - Only can be called by the current {defaultAdmin}.
     *
     * May emit a DefaultAdminDelayChangeCanceled event.
     */
    function rollbackDefaultAdminDelay() external;

    /**
     * @dev Maximum time in seconds for an increase to {defaultAdminDelay} (that is scheduled using {changeDefaultAdminDelay})
     * to take effect. Default to 5 days.
     *
     * When the {defaultAdminDelay} is scheduled to be increased, it goes into effect after the new delay has passed with
     * the purpose of giving enough time for reverting any accidental change (i.e. using milliseconds instead of seconds)
     * that may lock the contract. However, to avoid excessive schedules, the wait is capped by this function and it can
     * be overrode for a custom {defaultAdminDelay} increase scheduling.
     *
     * IMPORTANT: Make sure to add a reasonable amount of time while overriding this value, otherwise,
     * there's a risk of setting a high new delay that goes into effect almost immediately without the
     * possibility of human intervention in the case of an input error (eg. set milliseconds instead of seconds).
     */
    function defaultAdminDelayIncreaseWait() external view returns (uint48);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (access/IAccessControl.sol)

pragma solidity ^0.8.20;

/**
 * @dev External interface of AccessControl declared to support ERC165 detection.
 */
interface IAccessControl {
    /**
     * @dev The `account` is missing a role.
     */
    error AccessControlUnauthorizedAccount(address account, bytes32 neededRole);

    /**
     * @dev The caller of a function is not the expected one.
     *
     * NOTE: Don't confuse with {AccessControlUnauthorizedAccount}.
     */
    error AccessControlBadConfirmation();

    /**
     * @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
     *
     * `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
     * {RoleAdminChanged} not being emitted signaling this.
     */
    event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);

    /**
     * @dev Emitted when `account` is granted `role`.
     *
     * `sender` is the account that originated the contract call, an admin role
     * bearer except when using {AccessControl-_setupRole}.
     */
    event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Emitted when `account` is revoked `role`.
     *
     * `sender` is the account that originated the contract call:
     *   - if using `revokeRole`, it is the admin role bearer
     *   - if using `renounceRole`, it is the role bearer (i.e. `account`)
     */
    event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Returns `true` if `account` has been granted `role`.
     */
    function hasRole(bytes32 role, address account) external view returns (bool);

    /**
     * @dev Returns the admin role that controls `role`. See {grantRole} and
     * {revokeRole}.
     *
     * To change a role's admin, use {AccessControl-_setRoleAdmin}.
     */
    function getRoleAdmin(bytes32 role) external view returns (bytes32);

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function grantRole(bytes32 role, address account) external;

    /**
     * @dev Revokes `role` from `account`.
     *
     * If `account` had been granted `role`, emits a {RoleRevoked} event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function revokeRole(bytes32 role, address account) external;

    /**
     * @dev Revokes `role` from the calling account.
     *
     * Roles are often managed via {grantRole} and {revokeRole}: this function's
     * purpose is to provide a mechanism for accounts to lose their privileges
     * if they are compromised (such as when a trusted device is misplaced).
     *
     * If the calling account had been granted `role`, emits a {RoleRevoked}
     * event.
     *
     * Requirements:
     *
     * - the caller must be `callerConfirmation`.
     */
    function renounceRole(bytes32 role, address callerConfirmation) external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (interfaces/IERC5313.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface for the Light Contract Ownership Standard.
 *
 * A standardized minimal interface required to identify an account that controls a contract
 */
interface IERC5313 {
    /**
     * @dev Gets the address of the owner.
     */
    function owner() external view returns (address);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.1) (utils/Context.sol)

pragma solidity ^0.8.20;

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    function _contextSuffixLength() internal view virtual returns (uint256) {
        return 0;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/ERC165.sol)

pragma solidity ^0.8.20;

import {IERC165} from "./IERC165.sol";

/**
 * @dev Implementation of the {IERC165} interface.
 *
 * Contracts that want to implement ERC165 should inherit from this contract and override {supportsInterface} to check
 * for the additional interface id that will be supported. For example:
 *
 * ```solidity
 * function supportsInterface(bytes4 interfaceId) public view virtual override returns (bool) {
 *     return interfaceId == type(MyInterface).interfaceId || super.supportsInterface(interfaceId);
 * }
 * ```
 */
abstract contract ERC165 is IERC165 {
    /**
     * @dev See {IERC165-supportsInterface}.
     */
    function supportsInterface(bytes4 interfaceId) public view virtual returns (bool) {
        return interfaceId == type(IERC165).interfaceId;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/introspection/IERC165.sol)

pragma solidity ^0.8.20;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/Math.sol)

pragma solidity ^0.8.20;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    /**
     * @dev Muldiv operation overflow.
     */
    error MathOverflowedMulDiv();

    enum Rounding {
        Floor, // Toward negative infinity
        Ceil, // Toward positive infinity
        Trunc, // Toward zero
        Expand // Away from zero
    }

    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            uint256 c = a + b;
            if (c < a) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, with an overflow flag.
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b > a) return (false, 0);
            return (true, a - b);
        }
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
            // benefit is lost if 'b' is also tested.
            // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
            if (a == 0) return (true, 0);
            uint256 c = a * b;
            if (c / a != b) return (false, 0);
            return (true, c);
        }
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a / b);
        }
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        unchecked {
            if (b == 0) return (false, 0);
            return (true, a % b);
        }
    }

    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a > b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow.
        return (a & b) + (a ^ b) / 2;
    }

    /**
     * @dev Returns the ceiling of the division of two numbers.
     *
     * This differs from standard division with `/` in that it rounds towards infinity instead
     * of rounding towards zero.
     */
    function ceilDiv(uint256 a, uint256 b) internal pure returns (uint256) {
        if (b == 0) {
            // Guarantee the same behavior as in a regular Solidity division.
            return a / b;
        }

        // (a + b - 1) / b can overflow on addition, so we distribute.
        return a == 0 ? 0 : (a - 1) / b + 1;
    }

    /**
     * @notice Calculates floor(x * y / denominator) with full precision. Throws if result overflows a uint256 or
     * denominator == 0.
     * @dev Original credit to Remco Bloemen under MIT license (https://xn--2-umb.com/21/muldiv) with further edits by
     * Uniswap Labs also under MIT license.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator) internal pure returns (uint256 result) {
        unchecked {
            // 512-bit multiply [prod1 prod0] = x * y. Compute the product mod 2^256 and mod 2^256 - 1, then use
            // use the Chinese Remainder Theorem to reconstruct the 512 bit result. The result is stored in two 256
            // variables such that product = prod1 * 2^256 + prod0.
            uint256 prod0 = x * y; // Least significant 256 bits of the product
            uint256 prod1; // Most significant 256 bits of the product
            assembly {
                let mm := mulmod(x, y, not(0))
                prod1 := sub(sub(mm, prod0), lt(mm, prod0))
            }

            // Handle non-overflow cases, 256 by 256 division.
            if (prod1 == 0) {
                // Solidity will revert if denominator == 0, unlike the div opcode on its own.
                // The surrounding unchecked block does not change this fact.
                // See https://docs.soliditylang.org/en/latest/control-structures.html#checked-or-unchecked-arithmetic.
                return prod0 / denominator;
            }

            // Make sure the result is less than 2^256. Also prevents denominator == 0.
            if (denominator <= prod1) {
                revert MathOverflowedMulDiv();
            }

            ///////////////////////////////////////////////
            // 512 by 256 division.
            ///////////////////////////////////////////////

            // Make division exact by subtracting the remainder from [prod1 prod0].
            uint256 remainder;
            assembly {
                // Compute remainder using mulmod.
                remainder := mulmod(x, y, denominator)

                // Subtract 256 bit number from 512 bit number.
                prod1 := sub(prod1, gt(remainder, prod0))
                prod0 := sub(prod0, remainder)
            }

            // Factor powers of two out of denominator and compute largest power of two divisor of denominator.
            // Always >= 1. See https://cs.stackexchange.com/q/138556/92363.

            uint256 twos = denominator & (0 - denominator);
            assembly {
                // Divide denominator by twos.
                denominator := div(denominator, twos)

                // Divide [prod1 prod0] by twos.
                prod0 := div(prod0, twos)

                // Flip twos such that it is 2^256 / twos. If twos is zero, then it becomes one.
                twos := add(div(sub(0, twos), twos), 1)
            }

            // Shift in bits from prod1 into prod0.
            prod0 |= prod1 * twos;

            // Invert denominator mod 2^256. Now that denominator is an odd number, it has an inverse modulo 2^256 such
            // that denominator * inv = 1 mod 2^256. Compute the inverse by starting with a seed that is correct for
            // four bits. That is, denominator * inv = 1 mod 2^4.
            uint256 inverse = (3 * denominator) ^ 2;

            // Use the Newton-Raphson iteration to improve the precision. Thanks to Hensel's lifting lemma, this also
            // works in modular arithmetic, doubling the correct bits in each step.
            inverse *= 2 - denominator * inverse; // inverse mod 2^8
            inverse *= 2 - denominator * inverse; // inverse mod 2^16
            inverse *= 2 - denominator * inverse; // inverse mod 2^32
            inverse *= 2 - denominator * inverse; // inverse mod 2^64
            inverse *= 2 - denominator * inverse; // inverse mod 2^128
            inverse *= 2 - denominator * inverse; // inverse mod 2^256

            // Because the division is now exact we can divide by multiplying with the modular inverse of denominator.
            // This will give us the correct result modulo 2^256. Since the preconditions guarantee that the outcome is
            // less than 2^256, this is the final result. We don't need to compute the high bits of the result and prod1
            // is no longer required.
            result = prod0 * inverse;
            return result;
        }
    }

    /**
     * @notice Calculates x * y / denominator with full precision, following the selected rounding direction.
     */
    function mulDiv(uint256 x, uint256 y, uint256 denominator, Rounding rounding) internal pure returns (uint256) {
        uint256 result = mulDiv(x, y, denominator);
        if (unsignedRoundsUp(rounding) && mulmod(x, y, denominator) > 0) {
            result += 1;
        }
        return result;
    }

    /**
     * @dev Returns the square root of a number. If the number is not a perfect square, the value is rounded
     * towards zero.
     *
     * Inspired by Henry S. Warren, Jr.'s "Hacker's Delight" (Chapter 11).
     */
    function sqrt(uint256 a) internal pure returns (uint256) {
        if (a == 0) {
            return 0;
        }

        // For our first guess, we get the biggest power of 2 which is smaller than the square root of the target.
        //
        // We know that the "msb" (most significant bit) of our target number `a` is a power of 2 such that we have
        // `msb(a) <= a < 2*msb(a)`. This value can be written `msb(a)=2**k` with `k=log2(a)`.
        //
        // This can be rewritten `2**log2(a) <= a < 2**(log2(a) + 1)`
        // → `sqrt(2**k) <= sqrt(a) < sqrt(2**(k+1))`
        // → `2**(k/2) <= sqrt(a) < 2**((k+1)/2) <= 2**(k/2 + 1)`
        //
        // Consequently, `2**(log2(a) / 2)` is a good first approximation of `sqrt(a)` with at least 1 correct bit.
        uint256 result = 1 << (log2(a) >> 1);

        // At this point `result` is an estimation with one bit of precision. We know the true value is a uint128,
        // since it is the square root of a uint256. Newton's method converges quadratically (precision doubles at
        // every iteration). We thus need at most 7 iteration to turn our partial result with one bit of precision
        // into the expected uint128 result.
        unchecked {
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            result = (result + a / result) >> 1;
            return min(result, a / result);
        }
    }

    /**
     * @notice Calculates sqrt(a), following the selected rounding direction.
     */
    function sqrt(uint256 a, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = sqrt(a);
            return result + (unsignedRoundsUp(rounding) && result * result < a ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 2 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     */
    function log2(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 128;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 64;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 32;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 16;
            }
            if (value >> 8 > 0) {
                value >>= 8;
                result += 8;
            }
            if (value >> 4 > 0) {
                value >>= 4;
                result += 4;
            }
            if (value >> 2 > 0) {
                value >>= 2;
                result += 2;
            }
            if (value >> 1 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 2, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log2(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log2(value);
            return result + (unsignedRoundsUp(rounding) && 1 << result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 10 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     */
    function log10(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >= 10 ** 64) {
                value /= 10 ** 64;
                result += 64;
            }
            if (value >= 10 ** 32) {
                value /= 10 ** 32;
                result += 32;
            }
            if (value >= 10 ** 16) {
                value /= 10 ** 16;
                result += 16;
            }
            if (value >= 10 ** 8) {
                value /= 10 ** 8;
                result += 8;
            }
            if (value >= 10 ** 4) {
                value /= 10 ** 4;
                result += 4;
            }
            if (value >= 10 ** 2) {
                value /= 10 ** 2;
                result += 2;
            }
            if (value >= 10 ** 1) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 10, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log10(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log10(value);
            return result + (unsignedRoundsUp(rounding) && 10 ** result < value ? 1 : 0);
        }
    }

    /**
     * @dev Return the log in base 256 of a positive value rounded towards zero.
     * Returns 0 if given 0.
     *
     * Adding one to the result gives the number of pairs of hex symbols needed to represent `value` as a hex string.
     */
    function log256(uint256 value) internal pure returns (uint256) {
        uint256 result = 0;
        unchecked {
            if (value >> 128 > 0) {
                value >>= 128;
                result += 16;
            }
            if (value >> 64 > 0) {
                value >>= 64;
                result += 8;
            }
            if (value >> 32 > 0) {
                value >>= 32;
                result += 4;
            }
            if (value >> 16 > 0) {
                value >>= 16;
                result += 2;
            }
            if (value >> 8 > 0) {
                result += 1;
            }
        }
        return result;
    }

    /**
     * @dev Return the log in base 256, following the selected rounding direction, of a positive value.
     * Returns 0 if given 0.
     */
    function log256(uint256 value, Rounding rounding) internal pure returns (uint256) {
        unchecked {
            uint256 result = log256(value);
            return result + (unsignedRoundsUp(rounding) && 1 << (result << 3) < value ? 1 : 0);
        }
    }

    /**
     * @dev Returns whether a provided rounding mode is considered rounding up for unsigned integers.
     */
    function unsignedRoundsUp(Rounding rounding) internal pure returns (bool) {
        return uint8(rounding) % 2 == 1;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/math/SafeCast.sol)
// This file was procedurally generated from scripts/generate/templates/SafeCast.js.

pragma solidity ^0.8.20;

/**
 * @dev Wrappers over Solidity's uintXX/intXX casting operators with added overflow
 * checks.
 *
 * Downcasting from uint256/int256 in Solidity does not revert on overflow. This can
 * easily result in undesired exploitation or bugs, since developers usually
 * assume that overflows raise errors. `SafeCast` restores this intuition by
 * reverting the transaction when such an operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeCast {
    /**
     * @dev Value doesn't fit in an uint of `bits` size.
     */
    error SafeCastOverflowedUintDowncast(uint8 bits, uint256 value);

    /**
     * @dev An int value doesn't fit in an uint of `bits` size.
     */
    error SafeCastOverflowedIntToUint(int256 value);

    /**
     * @dev Value doesn't fit in an int of `bits` size.
     */
    error SafeCastOverflowedIntDowncast(uint8 bits, int256 value);

    /**
     * @dev An uint value doesn't fit in an int of `bits` size.
     */
    error SafeCastOverflowedUintToInt(uint256 value);

    /**
     * @dev Returns the downcasted uint248 from uint256, reverting on
     * overflow (when the input is greater than largest uint248).
     *
     * Counterpart to Solidity's `uint248` operator.
     *
     * Requirements:
     *
     * - input must fit into 248 bits
     */
    function toUint248(uint256 value) internal pure returns (uint248) {
        if (value > type(uint248).max) {
            revert SafeCastOverflowedUintDowncast(248, value);
        }
        return uint248(value);
    }

    /**
     * @dev Returns the downcasted uint240 from uint256, reverting on
     * overflow (when the input is greater than largest uint240).
     *
     * Counterpart to Solidity's `uint240` operator.
     *
     * Requirements:
     *
     * - input must fit into 240 bits
     */
    function toUint240(uint256 value) internal pure returns (uint240) {
        if (value > type(uint240).max) {
            revert SafeCastOverflowedUintDowncast(240, value);
        }
        return uint240(value);
    }

    /**
     * @dev Returns the downcasted uint232 from uint256, reverting on
     * overflow (when the input is greater than largest uint232).
     *
     * Counterpart to Solidity's `uint232` operator.
     *
     * Requirements:
     *
     * - input must fit into 232 bits
     */
    function toUint232(uint256 value) internal pure returns (uint232) {
        if (value > type(uint232).max) {
            revert SafeCastOverflowedUintDowncast(232, value);
        }
        return uint232(value);
    }

    /**
     * @dev Returns the downcasted uint224 from uint256, reverting on
     * overflow (when the input is greater than largest uint224).
     *
     * Counterpart to Solidity's `uint224` operator.
     *
     * Requirements:
     *
     * - input must fit into 224 bits
     */
    function toUint224(uint256 value) internal pure returns (uint224) {
        if (value > type(uint224).max) {
            revert SafeCastOverflowedUintDowncast(224, value);
        }
        return uint224(value);
    }

    /**
     * @dev Returns the downcasted uint216 from uint256, reverting on
     * overflow (when the input is greater than largest uint216).
     *
     * Counterpart to Solidity's `uint216` operator.
     *
     * Requirements:
     *
     * - input must fit into 216 bits
     */
    function toUint216(uint256 value) internal pure returns (uint216) {
        if (value > type(uint216).max) {
            revert SafeCastOverflowedUintDowncast(216, value);
        }
        return uint216(value);
    }

    /**
     * @dev Returns the downcasted uint208 from uint256, reverting on
     * overflow (when the input is greater than largest uint208).
     *
     * Counterpart to Solidity's `uint208` operator.
     *
     * Requirements:
     *
     * - input must fit into 208 bits
     */
    function toUint208(uint256 value) internal pure returns (uint208) {
        if (value > type(uint208).max) {
            revert SafeCastOverflowedUintDowncast(208, value);
        }
        return uint208(value);
    }

    /**
     * @dev Returns the downcasted uint200 from uint256, reverting on
     * overflow (when the input is greater than largest uint200).
     *
     * Counterpart to Solidity's `uint200` operator.
     *
     * Requirements:
     *
     * - input must fit into 200 bits
     */
    function toUint200(uint256 value) internal pure returns (uint200) {
        if (value > type(uint200).max) {
            revert SafeCastOverflowedUintDowncast(200, value);
        }
        return uint200(value);
    }

    /**
     * @dev Returns the downcasted uint192 from uint256, reverting on
     * overflow (when the input is greater than largest uint192).
     *
     * Counterpart to Solidity's `uint192` operator.
     *
     * Requirements:
     *
     * - input must fit into 192 bits
     */
    function toUint192(uint256 value) internal pure returns (uint192) {
        if (value > type(uint192).max) {
            revert SafeCastOverflowedUintDowncast(192, value);
        }
        return uint192(value);
    }

    /**
     * @dev Returns the downcasted uint184 from uint256, reverting on
     * overflow (when the input is greater than largest uint184).
     *
     * Counterpart to Solidity's `uint184` operator.
     *
     * Requirements:
     *
     * - input must fit into 184 bits
     */
    function toUint184(uint256 value) internal pure returns (uint184) {
        if (value > type(uint184).max) {
            revert SafeCastOverflowedUintDowncast(184, value);
        }
        return uint184(value);
    }

    /**
     * @dev Returns the downcasted uint176 from uint256, reverting on
     * overflow (when the input is greater than largest uint176).
     *
     * Counterpart to Solidity's `uint176` operator.
     *
     * Requirements:
     *
     * - input must fit into 176 bits
     */
    function toUint176(uint256 value) internal pure returns (uint176) {
        if (value > type(uint176).max) {
            revert SafeCastOverflowedUintDowncast(176, value);
        }
        return uint176(value);
    }

    /**
     * @dev Returns the downcasted uint168 from uint256, reverting on
     * overflow (when the input is greater than largest uint168).
     *
     * Counterpart to Solidity's `uint168` operator.
     *
     * Requirements:
     *
     * - input must fit into 168 bits
     */
    function toUint168(uint256 value) internal pure returns (uint168) {
        if (value > type(uint168).max) {
            revert SafeCastOverflowedUintDowncast(168, value);
        }
        return uint168(value);
    }

    /**
     * @dev Returns the downcasted uint160 from uint256, reverting on
     * overflow (when the input is greater than largest uint160).
     *
     * Counterpart to Solidity's `uint160` operator.
     *
     * Requirements:
     *
     * - input must fit into 160 bits
     */
    function toUint160(uint256 value) internal pure returns (uint160) {
        if (value > type(uint160).max) {
            revert SafeCastOverflowedUintDowncast(160, value);
        }
        return uint160(value);
    }

    /**
     * @dev Returns the downcasted uint152 from uint256, reverting on
     * overflow (when the input is greater than largest uint152).
     *
     * Counterpart to Solidity's `uint152` operator.
     *
     * Requirements:
     *
     * - input must fit into 152 bits
     */
    function toUint152(uint256 value) internal pure returns (uint152) {
        if (value > type(uint152).max) {
            revert SafeCastOverflowedUintDowncast(152, value);
        }
        return uint152(value);
    }

    /**
     * @dev Returns the downcasted uint144 from uint256, reverting on
     * overflow (when the input is greater than largest uint144).
     *
     * Counterpart to Solidity's `uint144` operator.
     *
     * Requirements:
     *
     * - input must fit into 144 bits
     */
    function toUint144(uint256 value) internal pure returns (uint144) {
        if (value > type(uint144).max) {
            revert SafeCastOverflowedUintDowncast(144, value);
        }
        return uint144(value);
    }

    /**
     * @dev Returns the downcasted uint136 from uint256, reverting on
     * overflow (when the input is greater than largest uint136).
     *
     * Counterpart to Solidity's `uint136` operator.
     *
     * Requirements:
     *
     * - input must fit into 136 bits
     */
    function toUint136(uint256 value) internal pure returns (uint136) {
        if (value > type(uint136).max) {
            revert SafeCastOverflowedUintDowncast(136, value);
        }
        return uint136(value);
    }

    /**
     * @dev Returns the downcasted uint128 from uint256, reverting on
     * overflow (when the input is greater than largest uint128).
     *
     * Counterpart to Solidity's `uint128` operator.
     *
     * Requirements:
     *
     * - input must fit into 128 bits
     */
    function toUint128(uint256 value) internal pure returns (uint128) {
        if (value > type(uint128).max) {
            revert SafeCastOverflowedUintDowncast(128, value);
        }
        return uint128(value);
    }

    /**
     * @dev Returns the downcasted uint120 from uint256, reverting on
     * overflow (when the input is greater than largest uint120).
     *
     * Counterpart to Solidity's `uint120` operator.
     *
     * Requirements:
     *
     * - input must fit into 120 bits
     */
    function toUint120(uint256 value) internal pure returns (uint120) {
        if (value > type(uint120).max) {
            revert SafeCastOverflowedUintDowncast(120, value);
        }
        return uint120(value);
    }

    /**
     * @dev Returns the downcasted uint112 from uint256, reverting on
     * overflow (when the input is greater than largest uint112).
     *
     * Counterpart to Solidity's `uint112` operator.
     *
     * Requirements:
     *
     * - input must fit into 112 bits
     */
    function toUint112(uint256 value) internal pure returns (uint112) {
        if (value > type(uint112).max) {
            revert SafeCastOverflowedUintDowncast(112, value);
        }
        return uint112(value);
    }

    /**
     * @dev Returns the downcasted uint104 from uint256, reverting on
     * overflow (when the input is greater than largest uint104).
     *
     * Counterpart to Solidity's `uint104` operator.
     *
     * Requirements:
     *
     * - input must fit into 104 bits
     */
    function toUint104(uint256 value) internal pure returns (uint104) {
        if (value > type(uint104).max) {
            revert SafeCastOverflowedUintDowncast(104, value);
        }
        return uint104(value);
    }

    /**
     * @dev Returns the downcasted uint96 from uint256, reverting on
     * overflow (when the input is greater than largest uint96).
     *
     * Counterpart to Solidity's `uint96` operator.
     *
     * Requirements:
     *
     * - input must fit into 96 bits
     */
    function toUint96(uint256 value) internal pure returns (uint96) {
        if (value > type(uint96).max) {
            revert SafeCastOverflowedUintDowncast(96, value);
        }
        return uint96(value);
    }

    /**
     * @dev Returns the downcasted uint88 from uint256, reverting on
     * overflow (when the input is greater than largest uint88).
     *
     * Counterpart to Solidity's `uint88` operator.
     *
     * Requirements:
     *
     * - input must fit into 88 bits
     */
    function toUint88(uint256 value) internal pure returns (uint88) {
        if (value > type(uint88).max) {
            revert SafeCastOverflowedUintDowncast(88, value);
        }
        return uint88(value);
    }

    /**
     * @dev Returns the downcasted uint80 from uint256, reverting on
     * overflow (when the input is greater than largest uint80).
     *
     * Counterpart to Solidity's `uint80` operator.
     *
     * Requirements:
     *
     * - input must fit into 80 bits
     */
    function toUint80(uint256 value) internal pure returns (uint80) {
        if (value > type(uint80).max) {
            revert SafeCastOverflowedUintDowncast(80, value);
        }
        return uint80(value);
    }

    /**
     * @dev Returns the downcasted uint72 from uint256, reverting on
     * overflow (when the input is greater than largest uint72).
     *
     * Counterpart to Solidity's `uint72` operator.
     *
     * Requirements:
     *
     * - input must fit into 72 bits
     */
    function toUint72(uint256 value) internal pure returns (uint72) {
        if (value > type(uint72).max) {
            revert SafeCastOverflowedUintDowncast(72, value);
        }
        return uint72(value);
    }

    /**
     * @dev Returns the downcasted uint64 from uint256, reverting on
     * overflow (when the input is greater than largest uint64).
     *
     * Counterpart to Solidity's `uint64` operator.
     *
     * Requirements:
     *
     * - input must fit into 64 bits
     */
    function toUint64(uint256 value) internal pure returns (uint64) {
        if (value > type(uint64).max) {
            revert SafeCastOverflowedUintDowncast(64, value);
        }
        return uint64(value);
    }

    /**
     * @dev Returns the downcasted uint56 from uint256, reverting on
     * overflow (when the input is greater than largest uint56).
     *
     * Counterpart to Solidity's `uint56` operator.
     *
     * Requirements:
     *
     * - input must fit into 56 bits
     */
    function toUint56(uint256 value) internal pure returns (uint56) {
        if (value > type(uint56).max) {
            revert SafeCastOverflowedUintDowncast(56, value);
        }
        return uint56(value);
    }

    /**
     * @dev Returns the downcasted uint48 from uint256, reverting on
     * overflow (when the input is greater than largest uint48).
     *
     * Counterpart to Solidity's `uint48` operator.
     *
     * Requirements:
     *
     * - input must fit into 48 bits
     */
    function toUint48(uint256 value) internal pure returns (uint48) {
        if (value > type(uint48).max) {
            revert SafeCastOverflowedUintDowncast(48, value);
        }
        return uint48(value);
    }

    /**
     * @dev Returns the downcasted uint40 from uint256, reverting on
     * overflow (when the input is greater than largest uint40).
     *
     * Counterpart to Solidity's `uint40` operator.
     *
     * Requirements:
     *
     * - input must fit into 40 bits
     */
    function toUint40(uint256 value) internal pure returns (uint40) {
        if (value > type(uint40).max) {
            revert SafeCastOverflowedUintDowncast(40, value);
        }
        return uint40(value);
    }

    /**
     * @dev Returns the downcasted uint32 from uint256, reverting on
     * overflow (when the input is greater than largest uint32).
     *
     * Counterpart to Solidity's `uint32` operator.
     *
     * Requirements:
     *
     * - input must fit into 32 bits
     */
    function toUint32(uint256 value) internal pure returns (uint32) {
        if (value > type(uint32).max) {
            revert SafeCastOverflowedUintDowncast(32, value);
        }
        return uint32(value);
    }

    /**
     * @dev Returns the downcasted uint24 from uint256, reverting on
     * overflow (when the input is greater than largest uint24).
     *
     * Counterpart to Solidity's `uint24` operator.
     *
     * Requirements:
     *
     * - input must fit into 24 bits
     */
    function toUint24(uint256 value) internal pure returns (uint24) {
        if (value > type(uint24).max) {
            revert SafeCastOverflowedUintDowncast(24, value);
        }
        return uint24(value);
    }

    /**
     * @dev Returns the downcasted uint16 from uint256, reverting on
     * overflow (when the input is greater than largest uint16).
     *
     * Counterpart to Solidity's `uint16` operator.
     *
     * Requirements:
     *
     * - input must fit into 16 bits
     */
    function toUint16(uint256 value) internal pure returns (uint16) {
        if (value > type(uint16).max) {
            revert SafeCastOverflowedUintDowncast(16, value);
        }
        return uint16(value);
    }

    /**
     * @dev Returns the downcasted uint8 from uint256, reverting on
     * overflow (when the input is greater than largest uint8).
     *
     * Counterpart to Solidity's `uint8` operator.
     *
     * Requirements:
     *
     * - input must fit into 8 bits
     */
    function toUint8(uint256 value) internal pure returns (uint8) {
        if (value > type(uint8).max) {
            revert SafeCastOverflowedUintDowncast(8, value);
        }
        return uint8(value);
    }

    /**
     * @dev Converts a signed int256 into an unsigned uint256.
     *
     * Requirements:
     *
     * - input must be greater than or equal to 0.
     */
    function toUint256(int256 value) internal pure returns (uint256) {
        if (value < 0) {
            revert SafeCastOverflowedIntToUint(value);
        }
        return uint256(value);
    }

    /**
     * @dev Returns the downcasted int248 from int256, reverting on
     * overflow (when the input is less than smallest int248 or
     * greater than largest int248).
     *
     * Counterpart to Solidity's `int248` operator.
     *
     * Requirements:
     *
     * - input must fit into 248 bits
     */
    function toInt248(int256 value) internal pure returns (int248 downcasted) {
        downcasted = int248(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(248, value);
        }
    }

    /**
     * @dev Returns the downcasted int240 from int256, reverting on
     * overflow (when the input is less than smallest int240 or
     * greater than largest int240).
     *
     * Counterpart to Solidity's `int240` operator.
     *
     * Requirements:
     *
     * - input must fit into 240 bits
     */
    function toInt240(int256 value) internal pure returns (int240 downcasted) {
        downcasted = int240(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(240, value);
        }
    }

    /**
     * @dev Returns the downcasted int232 from int256, reverting on
     * overflow (when the input is less than smallest int232 or
     * greater than largest int232).
     *
     * Counterpart to Solidity's `int232` operator.
     *
     * Requirements:
     *
     * - input must fit into 232 bits
     */
    function toInt232(int256 value) internal pure returns (int232 downcasted) {
        downcasted = int232(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(232, value);
        }
    }

    /**
     * @dev Returns the downcasted int224 from int256, reverting on
     * overflow (when the input is less than smallest int224 or
     * greater than largest int224).
     *
     * Counterpart to Solidity's `int224` operator.
     *
     * Requirements:
     *
     * - input must fit into 224 bits
     */
    function toInt224(int256 value) internal pure returns (int224 downcasted) {
        downcasted = int224(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(224, value);
        }
    }

    /**
     * @dev Returns the downcasted int216 from int256, reverting on
     * overflow (when the input is less than smallest int216 or
     * greater than largest int216).
     *
     * Counterpart to Solidity's `int216` operator.
     *
     * Requirements:
     *
     * - input must fit into 216 bits
     */
    function toInt216(int256 value) internal pure returns (int216 downcasted) {
        downcasted = int216(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(216, value);
        }
    }

    /**
     * @dev Returns the downcasted int208 from int256, reverting on
     * overflow (when the input is less than smallest int208 or
     * greater than largest int208).
     *
     * Counterpart to Solidity's `int208` operator.
     *
     * Requirements:
     *
     * - input must fit into 208 bits
     */
    function toInt208(int256 value) internal pure returns (int208 downcasted) {
        downcasted = int208(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(208, value);
        }
    }

    /**
     * @dev Returns the downcasted int200 from int256, reverting on
     * overflow (when the input is less than smallest int200 or
     * greater than largest int200).
     *
     * Counterpart to Solidity's `int200` operator.
     *
     * Requirements:
     *
     * - input must fit into 200 bits
     */
    function toInt200(int256 value) internal pure returns (int200 downcasted) {
        downcasted = int200(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(200, value);
        }
    }

    /**
     * @dev Returns the downcasted int192 from int256, reverting on
     * overflow (when the input is less than smallest int192 or
     * greater than largest int192).
     *
     * Counterpart to Solidity's `int192` operator.
     *
     * Requirements:
     *
     * - input must fit into 192 bits
     */
    function toInt192(int256 value) internal pure returns (int192 downcasted) {
        downcasted = int192(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(192, value);
        }
    }

    /**
     * @dev Returns the downcasted int184 from int256, reverting on
     * overflow (when the input is less than smallest int184 or
     * greater than largest int184).
     *
     * Counterpart to Solidity's `int184` operator.
     *
     * Requirements:
     *
     * - input must fit into 184 bits
     */
    function toInt184(int256 value) internal pure returns (int184 downcasted) {
        downcasted = int184(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(184, value);
        }
    }

    /**
     * @dev Returns the downcasted int176 from int256, reverting on
     * overflow (when the input is less than smallest int176 or
     * greater than largest int176).
     *
     * Counterpart to Solidity's `int176` operator.
     *
     * Requirements:
     *
     * - input must fit into 176 bits
     */
    function toInt176(int256 value) internal pure returns (int176 downcasted) {
        downcasted = int176(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(176, value);
        }
    }

    /**
     * @dev Returns the downcasted int168 from int256, reverting on
     * overflow (when the input is less than smallest int168 or
     * greater than largest int168).
     *
     * Counterpart to Solidity's `int168` operator.
     *
     * Requirements:
     *
     * - input must fit into 168 bits
     */
    function toInt168(int256 value) internal pure returns (int168 downcasted) {
        downcasted = int168(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(168, value);
        }
    }

    /**
     * @dev Returns the downcasted int160 from int256, reverting on
     * overflow (when the input is less than smallest int160 or
     * greater than largest int160).
     *
     * Counterpart to Solidity's `int160` operator.
     *
     * Requirements:
     *
     * - input must fit into 160 bits
     */
    function toInt160(int256 value) internal pure returns (int160 downcasted) {
        downcasted = int160(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(160, value);
        }
    }

    /**
     * @dev Returns the downcasted int152 from int256, reverting on
     * overflow (when the input is less than smallest int152 or
     * greater than largest int152).
     *
     * Counterpart to Solidity's `int152` operator.
     *
     * Requirements:
     *
     * - input must fit into 152 bits
     */
    function toInt152(int256 value) internal pure returns (int152 downcasted) {
        downcasted = int152(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(152, value);
        }
    }

    /**
     * @dev Returns the downcasted int144 from int256, reverting on
     * overflow (when the input is less than smallest int144 or
     * greater than largest int144).
     *
     * Counterpart to Solidity's `int144` operator.
     *
     * Requirements:
     *
     * - input must fit into 144 bits
     */
    function toInt144(int256 value) internal pure returns (int144 downcasted) {
        downcasted = int144(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(144, value);
        }
    }

    /**
     * @dev Returns the downcasted int136 from int256, reverting on
     * overflow (when the input is less than smallest int136 or
     * greater than largest int136).
     *
     * Counterpart to Solidity's `int136` operator.
     *
     * Requirements:
     *
     * - input must fit into 136 bits
     */
    function toInt136(int256 value) internal pure returns (int136 downcasted) {
        downcasted = int136(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(136, value);
        }
    }

    /**
     * @dev Returns the downcasted int128 from int256, reverting on
     * overflow (when the input is less than smallest int128 or
     * greater than largest int128).
     *
     * Counterpart to Solidity's `int128` operator.
     *
     * Requirements:
     *
     * - input must fit into 128 bits
     */
    function toInt128(int256 value) internal pure returns (int128 downcasted) {
        downcasted = int128(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(128, value);
        }
    }

    /**
     * @dev Returns the downcasted int120 from int256, reverting on
     * overflow (when the input is less than smallest int120 or
     * greater than largest int120).
     *
     * Counterpart to Solidity's `int120` operator.
     *
     * Requirements:
     *
     * - input must fit into 120 bits
     */
    function toInt120(int256 value) internal pure returns (int120 downcasted) {
        downcasted = int120(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(120, value);
        }
    }

    /**
     * @dev Returns the downcasted int112 from int256, reverting on
     * overflow (when the input is less than smallest int112 or
     * greater than largest int112).
     *
     * Counterpart to Solidity's `int112` operator.
     *
     * Requirements:
     *
     * - input must fit into 112 bits
     */
    function toInt112(int256 value) internal pure returns (int112 downcasted) {
        downcasted = int112(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(112, value);
        }
    }

    /**
     * @dev Returns the downcasted int104 from int256, reverting on
     * overflow (when the input is less than smallest int104 or
     * greater than largest int104).
     *
     * Counterpart to Solidity's `int104` operator.
     *
     * Requirements:
     *
     * - input must fit into 104 bits
     */
    function toInt104(int256 value) internal pure returns (int104 downcasted) {
        downcasted = int104(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(104, value);
        }
    }

    /**
     * @dev Returns the downcasted int96 from int256, reverting on
     * overflow (when the input is less than smallest int96 or
     * greater than largest int96).
     *
     * Counterpart to Solidity's `int96` operator.
     *
     * Requirements:
     *
     * - input must fit into 96 bits
     */
    function toInt96(int256 value) internal pure returns (int96 downcasted) {
        downcasted = int96(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(96, value);
        }
    }

    /**
     * @dev Returns the downcasted int88 from int256, reverting on
     * overflow (when the input is less than smallest int88 or
     * greater than largest int88).
     *
     * Counterpart to Solidity's `int88` operator.
     *
     * Requirements:
     *
     * - input must fit into 88 bits
     */
    function toInt88(int256 value) internal pure returns (int88 downcasted) {
        downcasted = int88(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(88, value);
        }
    }

    /**
     * @dev Returns the downcasted int80 from int256, reverting on
     * overflow (when the input is less than smallest int80 or
     * greater than largest int80).
     *
     * Counterpart to Solidity's `int80` operator.
     *
     * Requirements:
     *
     * - input must fit into 80 bits
     */
    function toInt80(int256 value) internal pure returns (int80 downcasted) {
        downcasted = int80(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(80, value);
        }
    }

    /**
     * @dev Returns the downcasted int72 from int256, reverting on
     * overflow (when the input is less than smallest int72 or
     * greater than largest int72).
     *
     * Counterpart to Solidity's `int72` operator.
     *
     * Requirements:
     *
     * - input must fit into 72 bits
     */
    function toInt72(int256 value) internal pure returns (int72 downcasted) {
        downcasted = int72(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(72, value);
        }
    }

    /**
     * @dev Returns the downcasted int64 from int256, reverting on
     * overflow (when the input is less than smallest int64 or
     * greater than largest int64).
     *
     * Counterpart to Solidity's `int64` operator.
     *
     * Requirements:
     *
     * - input must fit into 64 bits
     */
    function toInt64(int256 value) internal pure returns (int64 downcasted) {
        downcasted = int64(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(64, value);
        }
    }

    /**
     * @dev Returns the downcasted int56 from int256, reverting on
     * overflow (when the input is less than smallest int56 or
     * greater than largest int56).
     *
     * Counterpart to Solidity's `int56` operator.
     *
     * Requirements:
     *
     * - input must fit into 56 bits
     */
    function toInt56(int256 value) internal pure returns (int56 downcasted) {
        downcasted = int56(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(56, value);
        }
    }

    /**
     * @dev Returns the downcasted int48 from int256, reverting on
     * overflow (when the input is less than smallest int48 or
     * greater than largest int48).
     *
     * Counterpart to Solidity's `int48` operator.
     *
     * Requirements:
     *
     * - input must fit into 48 bits
     */
    function toInt48(int256 value) internal pure returns (int48 downcasted) {
        downcasted = int48(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(48, value);
        }
    }

    /**
     * @dev Returns the downcasted int40 from int256, reverting on
     * overflow (when the input is less than smallest int40 or
     * greater than largest int40).
     *
     * Counterpart to Solidity's `int40` operator.
     *
     * Requirements:
     *
     * - input must fit into 40 bits
     */
    function toInt40(int256 value) internal pure returns (int40 downcasted) {
        downcasted = int40(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(40, value);
        }
    }

    /**
     * @dev Returns the downcasted int32 from int256, reverting on
     * overflow (when the input is less than smallest int32 or
     * greater than largest int32).
     *
     * Counterpart to Solidity's `int32` operator.
     *
     * Requirements:
     *
     * - input must fit into 32 bits
     */
    function toInt32(int256 value) internal pure returns (int32 downcasted) {
        downcasted = int32(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(32, value);
        }
    }

    /**
     * @dev Returns the downcasted int24 from int256, reverting on
     * overflow (when the input is less than smallest int24 or
     * greater than largest int24).
     *
     * Counterpart to Solidity's `int24` operator.
     *
     * Requirements:
     *
     * - input must fit into 24 bits
     */
    function toInt24(int256 value) internal pure returns (int24 downcasted) {
        downcasted = int24(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(24, value);
        }
    }

    /**
     * @dev Returns the downcasted int16 from int256, reverting on
     * overflow (when the input is less than smallest int16 or
     * greater than largest int16).
     *
     * Counterpart to Solidity's `int16` operator.
     *
     * Requirements:
     *
     * - input must fit into 16 bits
     */
    function toInt16(int256 value) internal pure returns (int16 downcasted) {
        downcasted = int16(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(16, value);
        }
    }

    /**
     * @dev Returns the downcasted int8 from int256, reverting on
     * overflow (when the input is less than smallest int8 or
     * greater than largest int8).
     *
     * Counterpart to Solidity's `int8` operator.
     *
     * Requirements:
     *
     * - input must fit into 8 bits
     */
    function toInt8(int256 value) internal pure returns (int8 downcasted) {
        downcasted = int8(value);
        if (downcasted != value) {
            revert SafeCastOverflowedIntDowncast(8, value);
        }
    }

    /**
     * @dev Converts an unsigned uint256 into a signed int256.
     *
     * Requirements:
     *
     * - input must be less than or equal to maxInt256.
     */
    function toInt256(uint256 value) internal pure returns (int256) {
        // Note: Unsafe cast below is okay because `type(int256).max` is guaranteed to be positive
        if (value > uint256(type(int256).max)) {
            revert SafeCastOverflowedUintToInt(value);
        }
        return int256(value);
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v5.0.0) (utils/ReentrancyGuard.sol)

pragma solidity ^0.8.20;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant NOT_ENTERED = 1;
    uint256 private constant ENTERED = 2;

    uint256 private _status;

    /**
     * @dev Unauthorized reentrant call.
     */
    error ReentrancyGuardReentrantCall();

    constructor() {
        _status = NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and making it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        _nonReentrantBefore();
        _;
        _nonReentrantAfter();
    }

    function _nonReentrantBefore() private {
        // On the first call to nonReentrant, _status will be NOT_ENTERED
        if (_status == ENTERED) {
            revert ReentrancyGuardReentrantCall();
        }

        // Any calls to nonReentrant after this point will fail
        _status = ENTERED;
    }

    function _nonReentrantAfter() private {
        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = NOT_ENTERED;
    }

    /**
     * @dev Returns true if the reentrancy guard is currently set to "entered", which indicates there is a
     * `nonReentrant` function in the call stack.
     */
    function _reentrancyGuardEntered() internal view returns (bool) {
        return _status == ENTERED;
    }
}

// SPDX-License-Identifier: Unlicense
/*
 * @title Solidity Bytes Arrays Utils
 * @author Gonçalo Sá <[email protected]>
 *
 * @dev Bytes tightly packed arrays utility library for ethereum contracts written in Solidity.
 *      The library lets you concatenate, slice and type cast bytes arrays both in memory and storage.
 */
pragma solidity >=0.8.0 <0.9.0;


library BytesLib {
    function concat(
        bytes memory _preBytes,
        bytes memory _postBytes
    )
        internal
        pure
        returns (bytes memory)
    {
        bytes memory tempBytes;

        assembly {
            // Get a location of some free memory and store it in tempBytes as
            // Solidity does for memory variables.
            tempBytes := mload(0x40)

            // Store the length of the first bytes array at the beginning of
            // the memory for tempBytes.
            let length := mload(_preBytes)
            mstore(tempBytes, length)

            // Maintain a memory counter for the current write location in the
            // temp bytes array by adding the 32 bytes for the array length to
            // the starting location.
            let mc := add(tempBytes, 0x20)
            // Stop copying when the memory counter reaches the length of the
            // first bytes array.
            let end := add(mc, length)

            for {
                // Initialize a copy counter to the start of the _preBytes data,
                // 32 bytes into its memory.
                let cc := add(_preBytes, 0x20)
            } lt(mc, end) {
                // Increase both counters by 32 bytes each iteration.
                mc := add(mc, 0x20)
                cc := add(cc, 0x20)
            } {
                // Write the _preBytes data into the tempBytes memory 32 bytes
                // at a time.
                mstore(mc, mload(cc))
            }

            // Add the length of _postBytes to the current length of tempBytes
            // and store it as the new length in the first 32 bytes of the
            // tempBytes memory.
            length := mload(_postBytes)
            mstore(tempBytes, add(length, mload(tempBytes)))

            // Move the memory counter back from a multiple of 0x20 to the
            // actual end of the _preBytes data.
            mc := end
            // Stop copying when the memory counter reaches the new combined
            // length of the arrays.
            end := add(mc, length)

            for {
                let cc := add(_postBytes, 0x20)
            } lt(mc, end) {
                mc := add(mc, 0x20)
                cc := add(cc, 0x20)
            } {
                mstore(mc, mload(cc))
            }

            // Update the free-memory pointer by padding our last write location
            // to 32 bytes: add 31 bytes to the end of tempBytes to move to the
            // next 32 byte block, then round down to the nearest multiple of
            // 32. If the sum of the length of the two arrays is zero then add
            // one before rounding down to leave a blank 32 bytes (the length block with 0).
            mstore(0x40, and(
              add(add(end, iszero(add(length, mload(_preBytes)))), 31),
              not(31) // Round down to the nearest 32 bytes.
            ))
        }

        return tempBytes;
    }

    function concatStorage(bytes storage _preBytes, bytes memory _postBytes) internal {
        assembly {
            // Read the first 32 bytes of _preBytes storage, which is the length
            // of the array. (We don't need to use the offset into the slot
            // because arrays use the entire slot.)
            let fslot := sload(_preBytes.slot)
            // Arrays of 31 bytes or less have an even value in their slot,
            // while longer arrays have an odd value. The actual length is
            // the slot divided by two for odd values, and the lowest order
            // byte divided by two for even values.
            // If the slot is even, bitwise and the slot with 255 and divide by
            // two to get the length. If the slot is odd, bitwise and the slot
            // with -1 and divide by two.
            let slength := div(and(fslot, sub(mul(0x100, iszero(and(fslot, 1))), 1)), 2)
            let mlength := mload(_postBytes)
            let newlength := add(slength, mlength)
            // slength can contain both the length and contents of the array
            // if length < 32 bytes so let's prepare for that
            // v. http://solidity.readthedocs.io/en/latest/miscellaneous.html#layout-of-state-variables-in-storage
            switch add(lt(slength, 32), lt(newlength, 32))
            case 2 {
                // Since the new array still fits in the slot, we just need to
                // update the contents of the slot.
                // uint256(bytes_storage) = uint256(bytes_storage) + uint256(bytes_memory) + new_length
                sstore(
                    _preBytes.slot,
                    // all the modifications to the slot are inside this
                    // next block
                    add(
                        // we can just add to the slot contents because the
                        // bytes we want to change are the LSBs
                        fslot,
                        add(
                            mul(
                                div(
                                    // load the bytes from memory
                                    mload(add(_postBytes, 0x20)),
                                    // zero all bytes to the right
                                    exp(0x100, sub(32, mlength))
                                ),
                                // and now shift left the number of bytes to
                                // leave space for the length in the slot
                                exp(0x100, sub(32, newlength))
                            ),
                            // increase length by the double of the memory
                            // bytes length
                            mul(mlength, 2)
                        )
                    )
                )
            }
            case 1 {
                // The stored value fits in the slot, but the combined value
                // will exceed it.
                // get the keccak hash to get the contents of the array
                mstore(0x0, _preBytes.slot)
                let sc := add(keccak256(0x0, 0x20), div(slength, 32))

                // save new length
                sstore(_preBytes.slot, add(mul(newlength, 2), 1))

                // The contents of the _postBytes array start 32 bytes into
                // the structure. Our first read should obtain the `submod`
                // bytes that can fit into the unused space in the last word
                // of the stored array. To get this, we read 32 bytes starting
                // from `submod`, so the data we read overlaps with the array
                // contents by `submod` bytes. Masking the lowest-order
                // `submod` bytes allows us to add that value directly to the
                // stored value.

                let submod := sub(32, slength)
                let mc := add(_postBytes, submod)
                let end := add(_postBytes, mlength)
                let mask := sub(exp(0x100, submod), 1)

                sstore(
                    sc,
                    add(
                        and(
                            fslot,
                            0xffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff00
                        ),
                        and(mload(mc), mask)
                    )
                )

                for {
                    mc := add(mc, 0x20)
                    sc := add(sc, 1)
                } lt(mc, end) {
                    sc := add(sc, 1)
                    mc := add(mc, 0x20)
                } {
                    sstore(sc, mload(mc))
                }

                mask := exp(0x100, sub(mc, end))

                sstore(sc, mul(div(mload(mc), mask), mask))
            }
            default {
                // get the keccak hash to get the contents of the array
                mstore(0x0, _preBytes.slot)
                // Start copying to the last used word of the stored array.
                let sc := add(keccak256(0x0, 0x20), div(slength, 32))

                // save new length
                sstore(_preBytes.slot, add(mul(newlength, 2), 1))

                // Copy over the first `submod` bytes of the new data as in
                // case 1 above.
                let slengthmod := mod(slength, 32)
                let mlengthmod := mod(mlength, 32)
                let submod := sub(32, slengthmod)
                let mc := add(_postBytes, submod)
                let end := add(_postBytes, mlength)
                let mask := sub(exp(0x100, submod), 1)

                sstore(sc, add(sload(sc), and(mload(mc), mask)))

                for {
                    sc := add(sc, 1)
                    mc := add(mc, 0x20)
                } lt(mc, end) {
                    sc := add(sc, 1)
                    mc := add(mc, 0x20)
                } {
                    sstore(sc, mload(mc))
                }

                mask := exp(0x100, sub(mc, end))

                sstore(sc, mul(div(mload(mc), mask), mask))
            }
        }
    }

    function slice(
        bytes memory _bytes,
        uint256 _start,
        uint256 _length
    )
        internal
        pure
        returns (bytes memory)
    {
        require(_length + 31 >= _length, "slice_overflow");
        require(_bytes.length >= _start + _length, "slice_outOfBounds");

        bytes memory tempBytes;

        assembly {
            switch iszero(_length)
            case 0 {
                // Get a location of some free memory and store it in tempBytes as
                // Solidity does for memory variables.
                tempBytes := mload(0x40)

                // The first word of the slice result is potentially a partial
                // word read from the original array. To read it, we calculate
                // the length of that partial word and start copying that many
                // bytes into the array. The first word we copy will start with
                // data we don't care about, but the last `lengthmod` bytes will
                // land at the beginning of the contents of the new array. When
                // we're done copying, we overwrite the full first word with
                // the actual length of the slice.
                let lengthmod := and(_length, 31)

                // The multiplication in the next line is necessary
                // because when slicing multiples of 32 bytes (lengthmod == 0)
                // the following copy loop was copying the origin's length
                // and then ending prematurely not copying everything it should.
                let mc := add(add(tempBytes, lengthmod), mul(0x20, iszero(lengthmod)))
                let end := add(mc, _length)

                for {
                    // The multiplication in the next line has the same exact purpose
                    // as the one above.
                    let cc := add(add(add(_bytes, lengthmod), mul(0x20, iszero(lengthmod))), _start)
                } lt(mc, end) {
                    mc := add(mc, 0x20)
                    cc := add(cc, 0x20)
                } {
                    mstore(mc, mload(cc))
                }

                mstore(tempBytes, _length)

                //update free-memory pointer
                //allocating the array padded to 32 bytes like the compiler does now
                mstore(0x40, and(add(mc, 31), not(31)))
            }
            //if we want a zero-length slice let's just return a zero-length array
            default {
                tempBytes := mload(0x40)
                //zero out the 32 bytes slice we are about to return
                //we need to do it because Solidity does not garbage collect
                mstore(tempBytes, 0)

                mstore(0x40, add(tempBytes, 0x20))
            }
        }

        return tempBytes;
    }

    function toAddress(bytes memory _bytes, uint256 _start) internal pure returns (address) {
        require(_bytes.length >= _start + 20, "toAddress_outOfBounds");
        address tempAddress;

        assembly {
            tempAddress := div(mload(add(add(_bytes, 0x20), _start)), 0x1000000000000000000000000)
        }

        return tempAddress;
    }

    function toUint8(bytes memory _bytes, uint256 _start) internal pure returns (uint8) {
        require(_bytes.length >= _start + 1 , "toUint8_outOfBounds");
        uint8 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0x1), _start))
        }

        return tempUint;
    }

    function toUint16(bytes memory _bytes, uint256 _start) internal pure returns (uint16) {
        require(_bytes.length >= _start + 2, "toUint16_outOfBounds");
        uint16 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0x2), _start))
        }

        return tempUint;
    }

    function toUint32(bytes memory _bytes, uint256 _start) internal pure returns (uint32) {
        require(_bytes.length >= _start + 4, "toUint32_outOfBounds");
        uint32 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0x4), _start))
        }

        return tempUint;
    }

    function toUint64(bytes memory _bytes, uint256 _start) internal pure returns (uint64) {
        require(_bytes.length >= _start + 8, "toUint64_outOfBounds");
        uint64 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0x8), _start))
        }

        return tempUint;
    }

    function toUint96(bytes memory _bytes, uint256 _start) internal pure returns (uint96) {
        require(_bytes.length >= _start + 12, "toUint96_outOfBounds");
        uint96 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0xc), _start))
        }

        return tempUint;
    }

    function toUint128(bytes memory _bytes, uint256 _start) internal pure returns (uint128) {
        require(_bytes.length >= _start + 16, "toUint128_outOfBounds");
        uint128 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0x10), _start))
        }

        return tempUint;
    }

    function toUint256(bytes memory _bytes, uint256 _start) internal pure returns (uint256) {
        require(_bytes.length >= _start + 32, "toUint256_outOfBounds");
        uint256 tempUint;

        assembly {
            tempUint := mload(add(add(_bytes, 0x20), _start))
        }

        return tempUint;
    }

    function toBytes32(bytes memory _bytes, uint256 _start) internal pure returns (bytes32) {
        require(_bytes.length >= _start + 32, "toBytes32_outOfBounds");
        bytes32 tempBytes32;

        assembly {
            tempBytes32 := mload(add(add(_bytes, 0x20), _start))
        }

        return tempBytes32;
    }

    function equal(bytes memory _preBytes, bytes memory _postBytes) internal pure returns (bool) {
        bool success = true;

        assembly {
            let length := mload(_preBytes)

            // if lengths don't match the arrays are not equal
            switch eq(length, mload(_postBytes))
            case 1 {
                // cb is a circuit breaker in the for loop since there's
                //  no said feature for inline assembly loops
                // cb = 1 - don't breaker
                // cb = 0 - break
                let cb := 1

                let mc := add(_preBytes, 0x20)
                let end := add(mc, length)

                for {
                    let cc := add(_postBytes, 0x20)
                // the next line is the loop condition:
                // while(uint256(mc < end) + cb == 2)
                } eq(add(lt(mc, end), cb), 2) {
                    mc := add(mc, 0x20)
                    cc := add(cc, 0x20)
                } {
                    // if any of these checks fails then arrays are not equal
                    if iszero(eq(mload(mc), mload(cc))) {
                        // unsuccess:
                        success := 0
                        cb := 0
                    }
                }
            }
            default {
                // unsuccess:
                success := 0
            }
        }

        return success;
    }

    function equal_nonAligned(bytes memory _preBytes, bytes memory _postBytes) internal pure returns (bool) {
        bool success = true;

        assembly {
            let length := mload(_preBytes)

            // if lengths don't match the arrays are not equal
            switch eq(length, mload(_postBytes))
            case 1 {
                // cb is a circuit breaker in the for loop since there's
                //  no said feature for inline assembly loops
                // cb = 1 - don't breaker
                // cb = 0 - break
                let cb := 1

                let endMinusWord := add(_preBytes, length)
                let mc := add(_preBytes, 0x20)
                let cc := add(_postBytes, 0x20)

                for {
                // the next line is the loop condition:
                // while(uint256(mc < endWord) + cb == 2)
                } eq(add(lt(mc, endMinusWord), cb), 2) {
                    mc := add(mc, 0x20)
                    cc := add(cc, 0x20)
                } {
                    // if any of these checks fails then arrays are not equal
                    if iszero(eq(mload(mc), mload(cc))) {
                        // unsuccess:
                        success := 0
                        cb := 0
                    }
                }

                // Only if still successful
                // For <1 word tail bytes
                if gt(success, 0) {
                    // Get the remainder of length/32
                    // length % 32 = AND(length, 32 - 1)
                    let numTailBytes := and(length, 0x1f)
                    let mcRem := mload(mc)
                    let ccRem := mload(cc)
                    for {
                        let i := 0
                    // the next line is the loop condition:
                    // while(uint256(i < numTailBytes) + cb == 2)
                    } eq(add(lt(i, numTailBytes), cb), 2) {
                        i := add(i, 1)
                    } {
                        if iszero(eq(byte(i, mcRem), byte(i, ccRem))) {
                            // unsuccess:
                            success := 0
                            cb := 0
                        }
                    }
                }
            }
            default {
                // unsuccess:
                success := 0
            }
        }

        return success;
    }

    function equalStorage(
        bytes storage _preBytes,
        bytes memory _postBytes
    )
        internal
        view
        returns (bool)
    {
        bool success = true;

        assembly {
            // we know _preBytes_offset is 0
            let fslot := sload(_preBytes.slot)
            // Decode the length of the stored array like in concatStorage().
            let slength := div(and(fslot, sub(mul(0x100, iszero(and(fslot, 1))), 1)), 2)
            let mlength := mload(_postBytes)

            // if lengths don't match the arrays are not equal
            switch eq(slength, mlength)
            case 1 {
                // slength can contain both the length and contents of the array
                // if length < 32 bytes so let's prepare for that
                // v. http://solidity.readthedocs.io/en/latest/miscellaneous.html#layout-of-state-variables-in-storage
                if iszero(iszero(slength)) {
                    switch lt(slength, 32)
                    case 1 {
                        // blank the last byte which is the length
                        fslot := mul(div(fslot, 0x100), 0x100)

                        if iszero(eq(fslot, mload(add(_postBytes, 0x20)))) {
                            // unsuccess:
                            success := 0
                        }
                    }
                    default {
                        // cb is a circuit breaker in the for loop since there's
                        //  no said feature for inline assembly loops
                        // cb = 1 - don't breaker
                        // cb = 0 - break
                        let cb := 1

                        // get the keccak hash to get the contents of the array
                        mstore(0x0, _preBytes.slot)
                        let sc := keccak256(0x0, 0x20)

                        let mc := add(_postBytes, 0x20)
                        let end := add(mc, mlength)

                        // the next line is the loop condition:
                        // while(uint256(mc < end) + cb == 2)
                        for {} eq(add(lt(mc, end), cb), 2) {
                            sc := add(sc, 1)
                            mc := add(mc, 0x20)
                        } {
                            if iszero(eq(sload(sc), mload(mc))) {
                                // unsuccess:
                                success := 0
                                cb := 0
                            }
                        }
                    }
                }
            }
            default {
                // unsuccess:
                success := 0
            }
        }

        return success;
    }
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.23;

import "@openzeppelin/contracts/utils/ReentrancyGuard.sol";

import "./interfaces/IBridgeRouter.sol";
import "./libraries/Messages.sol";

abstract contract BridgeMessenger is ReentrancyGuard {
    error InvalidBridgeRouter(address router);
    error CannotReceiveMessage(bytes32 messageId);
    error CannotRetryMessage(bytes32 messageId);
    error CannotReverseMessage(bytes32 messageId);

    IBridgeRouter internal immutable bridgeRouter;

    modifier onlyRouter() {
        if (msg.sender != address(bridgeRouter)) revert InvalidBridgeRouter(msg.sender);
        _;
    }

    constructor(IBridgeRouter bridgeRouter_) {
        bridgeRouter = bridgeRouter_;
    }

    function receiveMessage(Messages.MessageReceived memory message) external virtual onlyRouter nonReentrant {
        _receiveMessage(message);
    }

    function retryMessage(
        Messages.MessageReceived memory message,
        address caller,
        bytes memory extraArgs
    ) external virtual onlyRouter nonReentrant {
        _retryMessage(message, caller, extraArgs);
    }

    function reverseMessage(
        Messages.MessageReceived memory message,
        address caller,
        bytes memory extraArgs
    ) external virtual onlyRouter nonReentrant {
        _reverseMessage(message, caller, extraArgs);
    }

    function getBridgeRouter() public view returns (address) {
        return address(bridgeRouter);
    }

    function _sendMessage(Messages.MessageToSend memory message, uint256 feeAmount) internal virtual {
        bridgeRouter.sendMessage{ value: feeAmount }(message);
    }

    function _receiveMessage(Messages.MessageReceived memory message) internal virtual;

    function _retryMessage(
        Messages.MessageReceived memory message,
        address caller,
        bytes memory extraArgs
    ) internal virtual;

    function _reverseMessage(
        Messages.MessageReceived memory message,
        address caller,
        bytes memory extraArgs
    ) internal virtual;
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.23;

import "../libraries/Messages.sol";

interface IBridgeAdapter {
    event SendMessage(bytes32 operationId, Messages.MessageToSend message);
    event ReceiveMessage(bytes32 indexed messageId);

    error ChainAlreadyAdded(uint16 chainId);
    error ChainUnavailable(uint16 chainId);
    error InvalidBridgeRouter(address router);
    error InvalidMessageSender(bytes32 sourceAddress);
    error InvalidFinalityLevel(uint64 finalityLevel);
    error InvalidTokenAddress(bytes32 token);
    error InvalidReceivedAmount(uint256 expected, uint256 actual);
    error UnsupportedFinalityLevel(uint64 finalityLevel);
    error UnsupportedExtraArgs();
    error EmptyExtraArgs();

    function MANAGER_ROLE() external view returns (bytes32);

    function getSendFee(Messages.MessageToSend memory message) external view returns (uint256 fee);

    function sendMessage(Messages.MessageToSend memory message) external payable;

    /**
     * @notice Determine if chain is available to send messages to
     * @param chainId destination chain (as defined by Folks)
     * @return isAvailable whether is available
     */
    function isChainAvailable(uint16 chainId) external view returns (bool);
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.23;

import "./IBridgeAdapter.sol";
import "../libraries/Messages.sol";

interface IBridgeRouter {
    function MANAGER_ROLE() external view returns (bytes32);
    function MESSAGE_SENDER_ROLE() external view returns (bytes32);

    function getAdapter(uint16 adapterId) external view returns (IBridgeAdapter);

    function getSendFee(Messages.MessageToSend memory message) external view returns (uint256);

    function sendMessage(Messages.MessageToSend memory message) external payable;

    function receiveMessage(Messages.MessageReceived memory message) external payable;
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.23;

import "@solidity-bytes-utils/contracts/BytesLib.sol";

library Messages {
    using BytesLib for bytes;

    error InvalidExtraArgsTag();

    struct MessageParams {
        uint16 adapterId; // where to route message through
        uint16 returnAdapterId; // if applicable, where to route message through for return message
        uint256 receiverValue; // amount of value to attach for receive message
        uint256 gasLimit; // gas limit for receive message
        uint256 returnGasLimit; // if applicable, gas limit for return message
    }

    struct MessageToSend {
        Messages.MessageParams params; // message parameters
        bytes32 sender; // source address which sent the message
        uint16 destinationChainId; // chain to send message to
        bytes32 handler; // address to handle the message received
        bytes payload; // message payload
        uint64 finalityLevel; // zero for immediate, non-zero for finalised
        bytes extraArgs;
    }

    // bytes4(keccak256("Folks ExtraArgsV1));
    bytes4 public constant EXTRA_ARGS_V1_TAG = 0x1b366e79;
    struct ExtraArgsV1 {
        bytes32 token;
        bytes32 recipient;
        uint256 amount;
    }

    function extraArgsToBytes(ExtraArgsV1 memory extraArgs) internal pure returns (bytes memory bts) {
        return abi.encodeWithSelector(EXTRA_ARGS_V1_TAG, extraArgs);
    }

    function bytesToExtraArgs(bytes calldata bts) internal pure returns (Messages.ExtraArgsV1 memory extraArgs) {
        if (bts.length > 0) {
            if (bytes4(bts) != EXTRA_ARGS_V1_TAG) revert InvalidExtraArgsTag();
            extraArgs = abi.decode(bts[4:], (Messages.ExtraArgsV1));
        }
    }

    struct MessageReceived {
        bytes32 messageId; // uniquie identifier for message when combined with adapter id
        uint16 sourceChainId; // chain where message is sent from
        bytes32 sourceAddress; // address where message is sent from (e.g. spoke)
        bytes32 handler; // address of smart contract (which inherits from BridgeMessenger) to handle message received
        bytes payload; // message payload
        uint16 returnAdapterId; // if applicable, where to route message through for return message
        uint256 returnGasLimit; // if applicable, gas limit for return message
    }

    function convertEVMAddressToGenericAddress(address addr) internal pure returns (bytes32) {
        return bytes32(uint256(uint160(addr)));
    }

    function convertGenericAddressToEVMAddress(bytes32 addr) internal pure returns (address) {
        return address(uint160(uint256(addr)));
    }

    enum Action {
        // SPOKE -> HUB
        CreateAccount,
        InviteAddress,
        AcceptInviteAddress,
        UnregisterAddress,
        AddDelegate,
        RemoveDelegate,
        CreateLoan,
        DeleteLoan,
        CreateLoanAndDeposit,
        Deposit,
        DepositFToken,
        Withdraw,
        WithdrawFToken,
        Borrow,
        Repay,
        RepayWithCollateral,
        Liquidate,
        SwitchBorrowType,
        // HUB -> SPOKE
        SendToken
    }

    struct MessagePayload {
        Action action;
        bytes32 accountId;
        bytes32 userAddress;
        bytes data;
    }

    function encodeMessagePayload(MessagePayload memory payload) internal pure returns (bytes memory) {
        return abi.encodePacked(uint16(payload.action), payload.accountId, payload.userAddress, payload.data);
    }

    function decodeActionPayload(bytes memory serialized) internal pure returns (MessagePayload memory payload) {
        uint256 index = 0;
        payload.action = Action(serialized.toUint16(index));
        index += 2;
        payload.accountId = serialized.toBytes32(index);
        index += 32;
        payload.userAddress = serialized.toBytes32(index);
        index += 32;
        payload.data = serialized.slice(index, serialized.length - index);
    }

    struct MessageMetadata {
        uint16 returnAdapterId;
        uint256 returnGasLimit;
        bytes32 sender;
        bytes32 handler;
    }

    function encodePayloadWithMetadata(Messages.MessageToSend memory message) internal pure returns (bytes memory) {
        return
            abi.encodePacked(
                message.params.returnAdapterId,
                message.params.returnGasLimit,
                message.sender,
                message.handler,
                message.payload
            );
    }

    function decodePayloadWithMetadata(
        bytes memory serialized
    ) internal pure returns (MessageMetadata memory metadata, bytes memory payload) {
        uint256 index = 0;
        metadata.returnAdapterId = serialized.toUint16(index);
        index += 2;
        metadata.returnGasLimit = serialized.toUint256(index);
        index += 32;
        metadata.sender = serialized.toBytes32(index);
        index += 32;
        metadata.handler = serialized.toBytes32(index);
        index += 32;
        payload = serialized.slice(index, serialized.length - index);
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.23;

interface IAddressOracle {
    error AddressIneligible(address addr, uint16 action);

    function isEligible(address addr, uint16 action) external view returns (bool);
}

// SPDX-License-Identifier: BUSL-1.1
pragma solidity 0.8.23;

import "@openzeppelin/contracts/access/extensions/AccessControlDefaultAdminRules.sol";
import "./interfaces/IAddressOracle.sol";

contract SpokeState is AccessControlDefaultAdminRules {
    struct Hub {
        uint16 chainId;
        bytes32 contractAddress;
    }

    bytes32 public constant CONFIG_CONTRACTS_ROLE = keccak256("CONFIG_CONTRACTS");

    Hub internal _hub;
    IAddressOracle internal _addressOracle;

    constructor(
        address admin,
        uint16 hubChainId,
        bytes32 hubContractAddress,
        IAddressOracle addressOracle_
    ) AccessControlDefaultAdminRules(1 days, admin) {
        _setHub(hubChainId, hubContractAddress);
        _setAddressOracle(addressOracle_);
        _grantRole(CONFIG_CONTRACTS_ROLE, admin);
    }

    function setHub(uint16 chainId, bytes32 contractAddress) external onlyRole(CONFIG_CONTRACTS_ROLE) {
        _setHub(chainId, contractAddress);
    }

    function setAddressOracle(IAddressOracle newAddressOracle) external onlyRole(CONFIG_CONTRACTS_ROLE) {
        _setAddressOracle(newAddressOracle);
    }

    function _setHub(uint16 chainId, bytes32 contractAddress) internal {
        _hub = SpokeState.Hub({ chainId: chainId, contractAddress: contractAddress });
    }

    function _setAddressOracle(IAddressOracle newAddressOracle) internal {
        _addressOracle = newAddressOracle;
    }

    function getHubChainId() public view returns (uint16) {
        return _hub.chainId;
    }

    function getHubContractAddress() public view returns (bytes32) {
        return _hub.contractAddress;
    }

    function getAddressOracle() public view returns (address) {
        return address(_addressOracle);
    }
}

{
  "evmVersion": "paris",
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "metadata": {
    "useLiteralContent": true
  },
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"address","name":"admin","type":"address"},{"internalType":"contract IBridgeRouter","name":"bridgeRouter","type":"address"},{"internalType":"uint16","name":"hubChainId","type":"uint16"},{"internalType":"bytes32","name":"hubContractAddress","type":"bytes32"},{"internalType":"contract IAddressOracle","name":"addressOracle","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[],"name":"AccessControlBadConfirmation","type":"error"},{"inputs":[{"internalType":"uint48","name":"schedule","type":"uint48"}],"name":"AccessControlEnforcedDefaultAdminDelay","type":"error"},{"inputs":[],"name":"AccessControlEnforcedDefaultAdminRules","type":"error"},{"inputs":[{"internalType":"address","name":"defaultAdmin","type":"address"}],"name":"AccessControlInvalidDefaultAdmin","type":"error"},{"inputs":[{"internalType":"address","name":"account","type":"address"},{"internalType":"bytes32","name":"neededRole","type":"bytes32"}],"name":"AccessControlUnauthorizedAccount","type":"error"},{"inputs":[{"internalType":"address","name":"addr","type":"address"},{"internalType":"uint16","name":"action","type":"uint16"}],"name":"AddressIneligible","type":"error"},{"inputs":[{"internalType":"bytes32","name":"messageId","type":"bytes32"}],"name":"CannotReceiveMessage","type":"error"},{"inputs":[{"internalType":"bytes32","name":"messageId","type":"bytes32"}],"name":"CannotRetryMessage","type":"error"},{"inputs":[{"internalType":"bytes32","name":"messageId","type":"bytes32"}],"name":"CannotReverseMessage","type":"error"},{"inputs":[{"internalType":"address","name":"router","type":"address"}],"name":"InvalidBridgeRouter","type":"error"},{"inputs":[],"name":"ReentrancyGuardReentrantCall","type":"error"},{"inputs":[{"internalType":"uint8","name":"bits","type":"uint8"},{"internalType":"uint256","name":"value","type":"uint256"}],"name":"SafeCastOverflowedUintDowncast","type":"error"},{"anonymous":false,"inputs":[],"name":"DefaultAdminDelayChangeCanceled","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint48","name":"newDelay","type":"uint48"},{"indexed":false,"internalType":"uint48","name":"effectSchedule","type":"uint48"}],"name":"DefaultAdminDelayChangeScheduled","type":"event"},{"anonymous":false,"inputs":[],"name":"DefaultAdminTransferCanceled","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"newAdmin","type":"address"},{"indexed":false,"internalType":"uint48","name":"acceptSchedule","type":"uint48"}],"name":"DefaultAdminTransferScheduled","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"bytes32","name":"previousAdminRole","type":"bytes32"},{"indexed":true,"internalType":"bytes32","name":"newAdminRole","type":"bytes32"}],"name":"RoleAdminChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":true,"internalType":"address","name":"sender","type":"address"}],"name":"RoleGranted","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":true,"internalType":"address","name":"sender","type":"address"}],"name":"RoleRevoked","type":"event"},{"inputs":[],"name":"CONFIG_CONTRACTS_ROLE","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"DEFAULT_ADMIN_ROLE","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"acceptDefaultAdminTransfer","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"components":[{"internalType":"uint16","name":"adapterId","type":"uint16"},{"internalType":"uint16","name":"returnAdapterId","type":"uint16"},{"internalType":"uint256","name":"receiverValue","type":"uint256"},{"internalType":"uint256","name":"gasLimit","type":"uint256"},{"internalType":"uint256","name":"returnGasLimit","type":"uint256"}],"internalType":"struct Messages.MessageParams","name":"params","type":"tuple"},{"internalType":"bytes32","name":"accountId","type":"bytes32"}],"name":"acceptInviteAddress","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"components":[{"internalType":"uint16","name":"adapterId","type":"uint16"},{"internalType":"uint16","name":"returnAdapterId","type":"uint16"},{"internalType":"uint256","name":"receiverValue","type":"uint256"},{"internalType":"uint256","name":"gasLimit","type":"uint256"},{"internalType":"uint256","name":"returnGasLimit","type":"uint256"}],"internalType":"struct Messages.MessageParams","name":"params","type":"tuple"},{"internalType":"bytes32","name":"accountId","type":"bytes32"},{"internalType":"bytes32","name":"addr","type":"bytes32"}],"name":"addDelegate","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"address","name":"newAdmin","type":"address"}],"name":"beginDefaultAdminTransfer","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"components":[{"internalType":"uint16","name":"adapterId","type":"uint16"},{"internalType":"uint16","name":"returnAdapterId","type":"uint16"},{"internalType":"uint256","name":"receiverValue","type":"uint256"},{"internalType":"uint256","name":"gasLimit","type":"uint256"},{"internalType":"uint256","name":"returnGasLimit","type":"uint256"}],"internalType":"struct Messages.MessageParams","name":"params","type":"tuple"},{"internalType":"bytes32","name":"accountId","type":"bytes32"},{"internalType":"bytes32","name":"loanId","type":"bytes32"},{"internalType":"uint8","name":"poolId","type":"uint8"},{"internalType":"uint16","name":"chainId","type":"uint16"},{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"uint256","name":"maxStableRate","type":"uint256"}],"name":"borrow","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[],"name":"cancelDefaultAdminTransfer","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint48","name":"newDelay","type":"uint48"}],"name":"changeDefaultAdminDelay","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"components":[{"internalType":"uint16","name":"adapterId","type":"uint16"},{"internalType":"uint16","name":"returnAdapterId","type":"uint16"},{"internalType":"uint256","name":"receiverValue","type":"uint256"},{"internalType":"uint256","name":"gasLimit","type":"uint256"},{"internalType":"uint256","name":"returnGasLimit","type":"uint256"}],"internalType":"struct Messages.MessageParams","name":"params","type":"tuple"},{"internalType":"bytes32","name":"accountId","type":"bytes32"},{"internalType":"bytes4","name":"nonce","type":"bytes4"},{"internalType":"bytes32","name":"refAccountId","type":"bytes32"}],"name":"createAccount","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"components":[{"internalType":"uint16","name":"adapterId","type":"uint16"},{"internalType":"uint16","name":"returnAdapterId","type":"uint16"},{"internalType":"uint256","name":"receiverValue","type":"uint256"},{"internalType":"uint256","name":"gasLimit","type":"uint256"},{"internalType":"uint256","name":"returnGasLimit","type":"uint256"}],"internalType":"struct Messages.MessageParams","name":"params","type":"tuple"},{"internalType":"bytes32","name":"accountId","type":"bytes32"},{"internalType":"bytes4","name":"nonce","type":"bytes4"},{"internalType":"uint16","name":"loanTypeId","type":"uint16"},{"internalType":"bytes32","name":"loanName","type":"bytes32"}],"name":"createLoan","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[],"name":"defaultAdmin","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"defaultAdminDelay","outputs":[{"internalType":"uint48","name":"","type":"uint48"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"defaultAdminDelayIncreaseWait","outputs":[{"internalType":"uint48","name":"","type":"uint48"}],"stateMutability":"view","type":"function"},{"inputs":[{"components":[{"internalType":"uint16","name":"adapterId","type":"uint16"},{"internalType":"uint16","name":"returnAdapterId","type":"uint16"},{"internalType":"uint256","name":"receiverValue","type":"uint256"},{"internalType":"uint256","name":"gasLimit","type":"uint256"},{"internalType":"uint256","name":"returnGasLimit","type":"uint256"}],"internalType":"struct Messages.MessageParams","name":"params","type":"tuple"},{"internalType":"bytes32","name":"accountId","type":"bytes32"},{"internalType":"bytes32","name":"loanId","type":"bytes32"}],"name":"deleteLoan","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[],"name":"getAddressOracle","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getBridgeRouter","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getHubChainId","outputs":[{"internalType":"uint16","name":"","type":"uint16"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"getHubContractAddress","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"}],"name":"getRoleAdmin","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"grantRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"hasRole","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"components":[{"internalType":"uint16","name":"adapterId","type":"uint16"},{"internalType":"uint16","name":"returnAdapterId","type":"uint16"},{"internalType":"uint256","name":"receiverValue","type":"uint256"},{"internalType":"uint256","name":"gasLimit","type":"uint256"},{"internalType":"uint256","name":"returnGasLimit","type":"uint256"}],"internalType":"struct Messages.MessageParams","name":"params","type":"tuple"},{"internalType":"bytes32","name":"accountId","type":"bytes32"},{"internalType":"uint16","name":"chainId","type":"uint16"},{"internalType":"bytes32","name":"addr","type":"bytes32"},{"internalType":"bytes32","name":"refAccountId","type":"bytes32"}],"name":"inviteAddress","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"pendingDefaultAdmin","outputs":[{"internalType":"address","name":"newAdmin","type":"address"},{"internalType":"uint48","name":"schedule","type":"uint48"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"pendingDefaultAdminDelay","outputs":[{"internalType":"uint48","name":"newDelay","type":"uint48"},{"internalType":"uint48","name":"schedule","type":"uint48"}],"stateMutability":"view","type":"function"},{"inputs":[{"components":[{"internalType":"bytes32","name":"messageId","type":"bytes32"},{"internalType":"uint16","name":"sourceChainId","type":"uint16"},{"internalType":"bytes32","name":"sourceAddress","type":"bytes32"},{"internalType":"bytes32","name":"handler","type":"bytes32"},{"internalType":"bytes","name":"payload","type":"bytes"},{"internalType":"uint16","name":"returnAdapterId","type":"uint16"},{"internalType":"uint256","name":"returnGasLimit","type":"uint256"}],"internalType":"struct Messages.MessageReceived","name":"message","type":"tuple"}],"name":"receiveMessage","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"components":[{"internalType":"uint16","name":"adapterId","type":"uint16"},{"internalType":"uint16","name":"returnAdapterId","type":"uint16"},{"internalType":"uint256","name":"receiverValue","type":"uint256"},{"internalType":"uint256","name":"gasLimit","type":"uint256"},{"internalType":"uint256","name":"returnGasLimit","type":"uint256"}],"internalType":"struct Messages.MessageParams","name":"params","type":"tuple"},{"internalType":"bytes32","name":"accountId","type":"bytes32"},{"internalType":"bytes32","name":"addr","type":"bytes32"}],"name":"removeDelegate","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"renounceRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"components":[{"internalType":"uint16","name":"adapterId","type":"uint16"},{"internalType":"uint16","name":"returnAdapterId","type":"uint16"},{"internalType":"uint256","name":"receiverValue","type":"uint256"},{"internalType":"uint256","name":"gasLimit","type":"uint256"},{"internalType":"uint256","name":"returnGasLimit","type":"uint256"}],"internalType":"struct Messages.MessageParams","name":"params","type":"tuple"},{"internalType":"bytes32","name":"accountId","type":"bytes32"},{"internalType":"bytes32","name":"loanId","type":"bytes32"},{"internalType":"uint8","name":"poolId","type":"uint8"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"repayWithCollateral","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"components":[{"internalType":"bytes32","name":"messageId","type":"bytes32"},{"internalType":"uint16","name":"sourceChainId","type":"uint16"},{"internalType":"bytes32","name":"sourceAddress","type":"bytes32"},{"internalType":"bytes32","name":"handler","type":"bytes32"},{"internalType":"bytes","name":"payload","type":"bytes"},{"internalType":"uint16","name":"returnAdapterId","type":"uint16"},{"internalType":"uint256","name":"returnGasLimit","type":"uint256"}],"internalType":"struct Messages.MessageReceived","name":"message","type":"tuple"},{"internalType":"address","name":"caller","type":"address"},{"internalType":"bytes","name":"extraArgs","type":"bytes"}],"name":"retryMessage","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"components":[{"internalType":"bytes32","name":"messageId","type":"bytes32"},{"internalType":"uint16","name":"sourceChainId","type":"uint16"},{"internalType":"bytes32","name":"sourceAddress","type":"bytes32"},{"internalType":"bytes32","name":"handler","type":"bytes32"},{"internalType":"bytes","name":"payload","type":"bytes"},{"internalType":"uint16","name":"returnAdapterId","type":"uint16"},{"internalType":"uint256","name":"returnGasLimit","type":"uint256"}],"internalType":"struct Messages.MessageReceived","name":"message","type":"tuple"},{"internalType":"address","name":"caller","type":"address"},{"internalType":"bytes","name":"extraArgs","type":"bytes"}],"name":"reverseMessage","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"revokeRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"rollbackDefaultAdminDelay","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"contract IAddressOracle","name":"newAddressOracle","type":"address"}],"name":"setAddressOracle","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint16","name":"chainId","type":"uint16"},{"internalType":"bytes32","name":"contractAddress","type":"bytes32"}],"name":"setHub","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes4","name":"interfaceId","type":"bytes4"}],"name":"supportsInterface","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"components":[{"internalType":"uint16","name":"adapterId","type":"uint16"},{"internalType":"uint16","name":"returnAdapterId","type":"uint16"},{"internalType":"uint256","name":"receiverValue","type":"uint256"},{"internalType":"uint256","name":"gasLimit","type":"uint256"},{"internalType":"uint256","name":"returnGasLimit","type":"uint256"}],"internalType":"struct Messages.MessageParams","name":"params","type":"tuple"},{"internalType":"bytes32","name":"accountId","type":"bytes32"},{"internalType":"bytes32","name":"loanId","type":"bytes32"},{"internalType":"uint8","name":"poolId","type":"uint8"},{"internalType":"uint256","name":"maxStableRate","type":"uint256"}],"name":"switchBorrowType","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"components":[{"internalType":"uint16","name":"adapterId","type":"uint16"},{"internalType":"uint16","name":"returnAdapterId","type":"uint16"},{"internalType":"uint256","name":"receiverValue","type":"uint256"},{"internalType":"uint256","name":"gasLimit","type":"uint256"},{"internalType":"uint256","name":"returnGasLimit","type":"uint256"}],"internalType":"struct Messages.MessageParams","name":"params","type":"tuple"},{"internalType":"bytes32","name":"accountId","type":"bytes32"},{"internalType":"uint16","name":"chainId","type":"uint16"}],"name":"unregisterAddress","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"components":[{"internalType":"uint16","name":"adapterId","type":"uint16"},{"internalType":"uint16","name":"returnAdapterId","type":"uint16"},{"internalType":"uint256","name":"receiverValue","type":"uint256"},{"internalType":"uint256","name":"gasLimit","type":"uint256"},{"internalType":"uint256","name":"returnGasLimit","type":"uint256"}],"internalType":"struct Messages.MessageParams","name":"params","type":"tuple"},{"internalType":"bytes32","name":"accountId","type":"bytes32"},{"internalType":"bytes32","name":"loanId","type":"bytes32"},{"internalType":"uint8","name":"poolId","type":"uint8"},{"internalType":"uint16","name":"chainId","type":"uint16"},{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"bool","name":"isFAmount","type":"bool"}],"name":"withdraw","outputs":[],"stateMutability":"payable","type":"function"}]

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

000000000000000000000000ea94e11fad45675b3ed9102b8565ea7121984eb6000000000000000000000000fc828c500c90e63134b2b73537cc6cadff4ce6950000000000000000000000000000000000000000000000000000000000000064000000000000000000000000b39c03297e87032ff69f4d42a6698e4c4a9344490000000000000000000000000b2ef2abd21c1c25a64849f1e0ed9ffa40a1d5e0

-----Decoded View---------------
Arg [0] : admin (address): 0xEa94E11fAd45675B3ED9102b8565ea7121984EB6
Arg [1] : bridgeRouter (address): 0xFc828C500c90E63134B2B73537cC6cADfF4Ce695
Arg [2] : hubChainId (uint16): 100
Arg [3] : hubContractAddress (bytes32): 0x000000000000000000000000b39c03297e87032ff69f4d42a6698e4c4a934449
Arg [4] : addressOracle (address): 0x0b2Ef2aBd21C1c25A64849F1E0Ed9ffa40A1d5E0

-----Encoded View---------------
5 Constructor Arguments found :
Arg [0] : 000000000000000000000000ea94e11fad45675b3ed9102b8565ea7121984eb6
Arg [1] : 000000000000000000000000fc828c500c90e63134b2b73537cc6cadff4ce695
Arg [2] : 0000000000000000000000000000000000000000000000000000000000000064
Arg [3] : 000000000000000000000000b39c03297e87032ff69f4d42a6698e4c4a934449
Arg [4] : 0000000000000000000000000b2ef2abd21c1c25a64849f1e0ed9ffa40a1d5e0