Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

// SPDX-License-Identifier: MIT
pragma solidity 0.8.23;

import {ISquidMulticall} from "../interfaces/ISquidMulticall.sol";
import {IERC20} from "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import {IERC721Receiver} from "@openzeppelin/contracts/token/ERC721/IERC721Receiver.sol";
import {IERC1155Receiver} from "@openzeppelin/contracts/token/ERC1155/IERC1155Receiver.sol";
import {SafeERC20} from "@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol";

contract SquidMulticall is ISquidMulticall, IERC721Receiver, IERC1155Receiver {
    using SafeERC20 for IERC20;

    bytes4 private constant ERC165_INTERFACE_ID = 0x01ffc9a7;
    bytes4 private constant ERC721_TOKENRECEIVER_INTERFACE_ID = 0x150b7a02;
    bytes4 private constant ERC1155_TOKENRECEIVER_INTERFACE_ID = 0x4e2312e0;

    /// @inheritdoc ISquidMulticall
    function run(Call[] calldata calls) external payable {
        for (uint256 i = 0; i < calls.length; i++) {
            Call memory call = calls[i];

            if (call.callType == CallType.FullTokenBalance) {
                (address token, uint256 amountParameterPosition) = abi.decode(
                    call.payload,
                    (address, uint256)
                );
                uint256 amount = IERC20(token).balanceOf(address(this));
                // Deduct 1 from amount to keep hot balances and reduce gas cost
                if (amount > 0) {
                    // Cannot underflow because amount > 0
                    unchecked {
                        amount -= 1;
                    }
                }
                _setCallDataParameter(call.callData, amountParameterPosition, amount);
            } else if (call.callType == CallType.FullNativeBalance) {
                call.value = address(this).balance;
            } else if (call.callType == CallType.CollectTokenBalance) {
                address token = abi.decode(call.payload, (address));
                uint256 senderBalance = IERC20(token).balanceOf(msg.sender);
                IERC20(token).safeTransferFrom(msg.sender, address(this), senderBalance);
                continue;
            }

            (bool success, bytes memory data) = call.target.call{value: call.value}(call.callData);
            if (!success) revert CallFailed(i, data);
        }
    }

    function _setCallDataParameter(
        bytes memory callData,
        uint256 parameterPosition,
        uint256 value
    ) private pure {
        assembly {
            // 36 bytes shift because 32 for prefix + 4 for selector
            mstore(add(callData, add(36, mul(parameterPosition, 32))), value)
        }
    }

    /// @notice Implementation required by ERC165 for NFT reception.
    /// See https://eips.ethereum.org/EIPS/eip-165.
    function supportsInterface(bytes4 interfaceId) external pure returns (bool) {
        return
            interfaceId == ERC1155_TOKENRECEIVER_INTERFACE_ID ||
            interfaceId == ERC721_TOKENRECEIVER_INTERFACE_ID ||
            interfaceId == ERC165_INTERFACE_ID;
    }

    /// @notice Implementation required by ERC721 for NFT reception.
    /// See https://eips.ethereum.org/EIPS/eip-721.
    function onERC721Received(
        address,
        address,
        uint256,
        bytes calldata
    ) external pure returns (bytes4) {
        return IERC721Receiver.onERC721Received.selector;
    }

    /// @notice Implementation required by ERC1155 for NFT reception.
    /// See https://eips.ethereum.org/EIPS/eip-1155.
    function onERC1155Received(
        address,
        address,
        uint256,
        uint256,
        bytes calldata
    ) external pure returns (bytes4) {
        return IERC1155Receiver.onERC1155Received.selector;
    }

    /// @notice Implementation required by ERC1155 for NFT reception.
    /// See https://eips.ethereum.org/EIPS/eip-1155.
    function onERC1155BatchReceived(
        address,
        address,
        uint256[] calldata,
        uint256[] calldata,
        bytes calldata
    ) external pure returns (bytes4) {
        return IERC1155Receiver.onERC1155BatchReceived.selector;
    }

    /// @dev Enable native tokens reception with .transfer or .send
    receive() external payable {}
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC1155/IERC1155Receiver.sol)

pragma solidity ^0.8.0;

import "../../utils/introspection/IERC165.sol";

/**
 * @dev _Available since v3.1._
 */
interface IERC1155Receiver is IERC165 {
    /**
     * @dev Handles the receipt of a single ERC1155 token type. This function is
     * called at the end of a `safeTransferFrom` after the balance has been updated.
     *
     * NOTE: To accept the transfer, this must return
     * `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))`
     * (i.e. 0xf23a6e61, or its own function selector).
     *
     * @param operator The address which initiated the transfer (i.e. msg.sender)
     * @param from The address which previously owned the token
     * @param id The ID of the token being transferred
     * @param value The amount of tokens being transferred
     * @param data Additional data with no specified format
     * @return `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))` if transfer is allowed
     */
    function onERC1155Received(
        address operator,
        address from,
        uint256 id,
        uint256 value,
        bytes calldata data
    ) external returns (bytes4);

    /**
     * @dev Handles the receipt of a multiple ERC1155 token types. This function
     * is called at the end of a `safeBatchTransferFrom` after the balances have
     * been updated.
     *
     * NOTE: To accept the transfer(s), this must return
     * `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))`
     * (i.e. 0xbc197c81, or its own function selector).
     *
     * @param operator The address which initiated the batch transfer (i.e. msg.sender)
     * @param from The address which previously owned the token
     * @param ids An array containing ids of each token being transferred (order and length must match values array)
     * @param values An array containing amounts of each token being transferred (order and length must match ids array)
     * @param data Additional data with no specified format
     * @return `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))` if transfer is allowed
     */
    function onERC1155BatchReceived(
        address operator,
        address from,
        uint256[] calldata ids,
        uint256[] calldata values,
        bytes calldata data
    ) external returns (bytes4);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/extensions/IERC20Permit.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 amount) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.3) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";
import "../extensions/IERC20Permit.sol";
import "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    /**
     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    /**
     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
     */
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    /**
     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 oldAllowance = token.allowance(address(this), spender);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance + value));
    }

    /**
     * @dev Decrease the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance - value));
        }
    }

    /**
     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval
     * to be set to zero before setting it to a non-zero value, such as USDT.
     */
    function forceApprove(IERC20 token, address spender, uint256 value) internal {
        bytes memory approvalCall = abi.encodeWithSelector(token.approve.selector, spender, value);

        if (!_callOptionalReturnBool(token, approvalCall)) {
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, 0));
            _callOptionalReturn(token, approvalCall);
        }
    }

    /**
     * @dev Use a ERC-2612 signature to set the `owner` approval toward `spender` on `token`.
     * Revert on invalid signature.
     */
    function safePermit(
        IERC20Permit token,
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        uint256 nonceBefore = token.nonces(owner);
        token.permit(owner, spender, value, deadline, v, r, s);
        uint256 nonceAfter = token.nonces(owner);
        require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        require(returndata.length == 0 || abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.
     */
    function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false
        // and not revert is the subcall reverts.

        (bool success, bytes memory returndata) = address(token).call(data);
        return
            success && (returndata.length == 0 || abi.decode(returndata, (bool))) && Address.isContract(address(token));
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.6.0) (token/ERC721/IERC721Receiver.sol)

pragma solidity ^0.8.0;

/**
 * @title ERC721 token receiver interface
 * @dev Interface for any contract that wants to support safeTransfers
 * from ERC721 asset contracts.
 */
interface IERC721Receiver {
    /**
     * @dev Whenever an {IERC721} `tokenId` token is transferred to this contract via {IERC721-safeTransferFrom}
     * by `operator` from `from`, this function is called.
     *
     * It must return its Solidity selector to confirm the token transfer.
     * If any other value is returned or the interface is not implemented by the recipient, the transfer will be reverted.
     *
     * The selector can be obtained in Solidity with `IERC721Receiver.onERC721Received.selector`.
     */
    function onERC721Received(
        address operator,
        address from,
        uint256 tokenId,
        bytes calldata data
    ) external returns (bytes4);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     *
     * Furthermore, `isContract` will also return true if the target contract within
     * the same transaction is already scheduled for destruction by `SELFDESTRUCT`,
     * which only has an effect at the end of a transaction.
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.0/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.8.9;

/// @title SquidMulticall
/// @notice Multicall logic specific to Squid calls format. The contract specificity is mainly
/// to enable ERC20 and native token amounts in calldata between two calls.
/// @dev Support receiption of NFTs.
interface ISquidMulticall {
    /// @notice Call type that enables to specific behaviours of the multicall.
    enum CallType {
        // Will simply run calldata
        Default,
        // Will update amount field in calldata with ERC20 token balance of the multicall contract.
        FullTokenBalance,
        // Will update amount field in calldata with native token balance of the multicall contract.
        FullNativeBalance,
        // Will run a safeTransferFrom to get full ERC20 token balance of the caller.
        CollectTokenBalance
    }

    /// @notice Calldata format expected by multicall.
    struct Call {
        // Call type, see CallType struct description.
        CallType callType;
        // Address that will be called.
        address target;
        // Native token amount that will be sent in call.
        uint256 value;
        // Calldata that will be send in call.
        bytes callData;
        // Extra data used by multicall depending on call type.
        // Default: unused (provide 0x)
        // FullTokenBalance: address of the ERC20 token to get balance of and zero indexed position
        // of the amount parameter to update in function call contained by calldata.
        // Expect format is: abi.encode(address token, uint256 amountParameterPosition)
        // Eg: for function swap(address tokenIn, uint amountIn, address tokenOut, uint amountOutMin,)
        // amountParameterPosition would be 1.
        // FullNativeBalance: unused (provide 0x)
        // CollectTokenBalance: address of the ERC20 token to collect.
        // Expect format is: abi.encode(address token)
        bytes payload;
    }

    /// Thrown when one of the calls fails.
    /// @param callPosition Zero indexed position of the call in the call set provided to the
    /// multicall.
    /// @param reason Revert data returned by contract called in failing call.
    error CallFailed(uint256 callPosition, bytes reason);

    /// @notice Main function of the multicall that runs the call set.
    /// @param calls Call set to be ran by multicall.
    function run(Call[] calldata calls) external payable;
}

{
  "optimizer": {
    "enabled": true,
    "runs": 99999
  },
  "viaIR": true,
  "evmVersion": "paris",
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"uint256","name":"callPosition","type":"uint256"},{"internalType":"bytes","name":"reason","type":"bytes"}],"name":"CallFailed","type":"error"},{"inputs":[{"internalType":"address","name":"","type":"address"},{"internalType":"address","name":"","type":"address"},{"internalType":"uint256[]","name":"","type":"uint256[]"},{"internalType":"uint256[]","name":"","type":"uint256[]"},{"internalType":"bytes","name":"","type":"bytes"}],"name":"onERC1155BatchReceived","outputs":[{"internalType":"bytes4","name":"","type":"bytes4"}],"stateMutability":"pure","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"},{"internalType":"address","name":"","type":"address"},{"internalType":"uint256","name":"","type":"uint256"},{"internalType":"uint256","name":"","type":"uint256"},{"internalType":"bytes","name":"","type":"bytes"}],"name":"onERC1155Received","outputs":[{"internalType":"bytes4","name":"","type":"bytes4"}],"stateMutability":"pure","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"},{"internalType":"address","name":"","type":"address"},{"internalType":"uint256","name":"","type":"uint256"},{"internalType":"bytes","name":"","type":"bytes"}],"name":"onERC721Received","outputs":[{"internalType":"bytes4","name":"","type":"bytes4"}],"stateMutability":"pure","type":"function"},{"inputs":[{"components":[{"internalType":"enum ISquidMulticall.CallType","name":"callType","type":"uint8"},{"internalType":"address","name":"target","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"},{"internalType":"bytes","name":"callData","type":"bytes"},{"internalType":"bytes","name":"payload","type":"bytes"}],"internalType":"struct ISquidMulticall.Call[]","name":"calls","type":"tuple[]"}],"name":"run","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"bytes4","name":"interfaceId","type":"bytes4"}],"name":"supportsInterface","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"pure","type":"function"},{"stateMutability":"payable","type":"receive"}]

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