Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

// SPDX-License-Identifier: MIT
pragma solidity ^0.7.0;

import "@openzeppelin/contracts/access/AccessControl.sol";
import "@openzeppelin/contracts/GSN/Context.sol";
import "@openzeppelin/contracts/math/Math.sol";
import "@openzeppelin/contracts/math/SafeMath.sol";
import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import "@openzeppelin/contracts/utils/Pausable.sol";
import "@openzeppelin/contracts/utils/ReentrancyGuard.sol";

import "./RewardDistributionRecipient.sol";
import "./interfaces/IETHStakingRewards.sol";

/**
 * @title Phase 2 BANK Reward Pool for Float Protocol, specifically for ETH.
 * @notice This contract is used to reward `rewardToken` when ETH is staked.
 */
contract ETHPhase2Pool is IETHStakingRewards, Context, AccessControl, RewardDistributionRecipient, ReentrancyGuard {
  using SafeMath for uint256;
  using SafeERC20 for IERC20;

  /* ========== CONSTANTS ========== */
  uint256 public constant DURATION = 7 days;
  bytes32 public constant RECOVER_ROLE = keccak256("RECOVER_ROLE");

  /* ========== STATE VARIABLES ========== */
  IERC20 public rewardToken;

  uint256 public periodFinish = 0;
  uint256 public rewardRate = 0;
  uint256 public lastUpdateTime;
  uint256 public rewardPerTokenStored;

  mapping(address => uint256) public userRewardPerTokenPaid;
  mapping(address => uint256) public rewards;

  uint256 private _totalSupply;
  mapping(address => uint256) private _balances;

  /* ========== CONSTRUCTOR ========== */

  /**
   * @notice Construct a new Phase2Pool for ETH
   * @param _admin The default role controller for 
   * @param _rewardDistribution The reward distributor (can change reward rate)
   * @param _rewardToken The reward token to distribute
   */
  constructor(
    address _admin,
    address _rewardDistribution,
    address _rewardToken
  ) RewardDistributionRecipient(_admin) {
    rewardDistribution = _rewardDistribution;
    rewardToken = IERC20(_rewardToken);
    
    _setupRole(DEFAULT_ADMIN_ROLE, _admin);
    _setupRole(RECOVER_ROLE, _admin);
  }

  /* ========== EVENTS ========== */

  event RewardAdded(uint256 reward);
  event Staked(address indexed user, uint256 amount);
  event Withdrawn(address indexed user, uint256 amount);
  event RewardPaid(address indexed user, uint256 reward);
  event Recovered(address token, uint256 amount);

  /* ========== MODIFIERS ========== */

  modifier updateReward(address account) {
    rewardPerTokenStored = rewardPerToken();
    lastUpdateTime = lastTimeRewardApplicable();
    if (account != address(0)) {
      rewards[account] = earned(account);
      userRewardPerTokenPaid[account] = rewardPerTokenStored;
    }
    _;
  }

  /* ========== VIEWS ========== */

  function totalSupply() public override(IETHStakingRewards) view returns (uint256) {
    return _totalSupply;
  }

  function balanceOf(address account) public override(IETHStakingRewards) view returns (uint256) {
    return _balances[account];
  }

  function lastTimeRewardApplicable() public override(IETHStakingRewards) view returns (uint256) {
    return Math.min(block.timestamp, periodFinish);
  }

  function rewardPerToken() public override(IETHStakingRewards) view returns (uint256) {
    if (totalSupply() == 0) {
      return rewardPerTokenStored;
    }

    return
      rewardPerTokenStored.add(
        lastTimeRewardApplicable()
          .sub(lastUpdateTime)
          .mul(rewardRate)
          .mul(1e18)
          .div(totalSupply())
      );
  }

  function earned(address account) public override(IETHStakingRewards) view returns (uint256) {
    return
      balanceOf(account)
        .mul(rewardPerToken().sub(userRewardPerTokenPaid[account]))
        .div(1e18)
        .add(rewards[account]);
  }

  function getRewardForDuration() external override(IETHStakingRewards) view returns (uint256) {
    return rewardRate.mul(DURATION);
  }

  /* ========== MUTATIVE FUNCTIONS ========== */
  
  /**
   * @dev Fallback, `msg.value` of ETH sent to this contract grants caller account a matching stake in contract.
   * Emits {Staked} event to reflect this.
   */
  receive() external payable {
    stake(msg.value);
  }

  function stake(uint256 amount)
    public
    virtual
    override(IETHStakingRewards)
    payable
    updateReward(msg.sender)
  {
    require(amount > 0, "ETHPhase2Pool/ZeroStake");
    require(amount == msg.value, "ETHPhase2Pool/IncorrectEth");

    _totalSupply = _totalSupply.add(amount);
    _balances[msg.sender] = _balances[msg.sender].add(amount);

    emit Staked(msg.sender, amount);
  }

  function withdraw(uint256 amount) public override(IETHStakingRewards) updateReward(msg.sender) {
    require(amount > 0, "ETHPhase2Pool/ZeroWithdraw");
    _totalSupply = _totalSupply.sub(amount);
    _balances[msg.sender] = _balances[msg.sender].sub(amount);

    emit Withdrawn(msg.sender, amount);
    (bool success, ) = msg.sender.call{value: amount}("");
    require(success, "ETHPhase2Pool/EthTransferFail");
  }

  function exit() external override(IETHStakingRewards) {
    withdraw(balanceOf(msg.sender));
    getReward();
  }

  function getReward() public virtual override(IETHStakingRewards) updateReward(msg.sender) {
    uint256 reward = earned(msg.sender);
    if (reward > 0) {
      rewards[msg.sender] = 0;
      rewardToken.safeTransfer(msg.sender, reward);
      emit RewardPaid(msg.sender, reward);
    }
  }

  /* ========== RESTRICTED FUNCTIONS ========== */

  /* ----- Reward Distributor ----- */

  /**
    @notice Should be called after the amount of reward tokens has
     been sent to the contract.
     Reward should be divisible by duration.
    @param reward number of tokens to be distributed over the duration.
   */
  function notifyRewardAmount(uint256 reward)
    external
    override
    onlyRewardDistribution
    updateReward(address(0))
  {
    if (block.timestamp >= periodFinish) {
      rewardRate = reward.div(DURATION);
    } else {
      uint256 remaining = periodFinish.sub(block.timestamp);
      uint256 leftover = remaining.mul(rewardRate);
      rewardRate = reward.add(leftover).div(DURATION);
    }

    // Ensure provided reward amount is not more than the balance in the contract.
    // Keeps reward rate within the right range to prevent overflows in earned or rewardsPerToken
    // Reward + leftover < 1e18
    uint256 balance = rewardToken.balanceOf(address(this));
    require(
      rewardRate <= balance.div(DURATION), 
      "ETHPhase2Pool/LowRewardBalance"
    );

    lastUpdateTime = block.timestamp;
    periodFinish = block.timestamp.add(DURATION);
    emit RewardAdded(reward);
  }

  /* ----- RECOVER_ROLE ----- */

  /**
    @notice Provide accidental token retrieval. 
    @dev Sourced from synthetix/contracts/StakingRewards.sol
   */
  function recoverERC20(address tokenAddress, uint256 tokenAmount) external {
    require(
      hasRole(RECOVER_ROLE, _msgSender()), 
      "ETHPhase2Pool/HasRecoverRole"
    );
    require(
      tokenAddress != address(rewardToken), 
      "ETHPhase2Pool/NotReward"
    );

    IERC20(tokenAddress).safeTransfer(_msgSender(), tokenAmount);
    emit Recovered(tokenAddress, tokenAmount);
  }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

import "../utils/EnumerableSet.sol";
import "../utils/Address.sol";
import "../GSN/Context.sol";

/**
 * @dev Contract module that allows children to implement role-based access
 * control mechanisms.
 *
 * Roles are referred to by their `bytes32` identifier. These should be exposed
 * in the external API and be unique. The best way to achieve this is by
 * using `public constant` hash digests:
 *
 * ```
 * bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
 * ```
 *
 * Roles can be used to represent a set of permissions. To restrict access to a
 * function call, use {hasRole}:
 *
 * ```
 * function foo() public {
 *     require(hasRole(MY_ROLE, msg.sender));
 *     ...
 * }
 * ```
 *
 * Roles can be granted and revoked dynamically via the {grantRole} and
 * {revokeRole} functions. Each role has an associated admin role, and only
 * accounts that have a role's admin role can call {grantRole} and {revokeRole}.
 *
 * By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
 * that only accounts with this role will be able to grant or revoke other
 * roles. More complex role relationships can be created by using
 * {_setRoleAdmin}.
 *
 * WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to
 * grant and revoke this role. Extra precautions should be taken to secure
 * accounts that have been granted it.
 */
abstract contract AccessControl is Context {
    using EnumerableSet for EnumerableSet.AddressSet;
    using Address for address;

    struct RoleData {
        EnumerableSet.AddressSet members;
        bytes32 adminRole;
    }

    mapping (bytes32 => RoleData) private _roles;

    bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;

    /**
     * @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
     *
     * `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
     * {RoleAdminChanged} not being emitted signaling this.
     *
     * _Available since v3.1._
     */
    event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);

    /**
     * @dev Emitted when `account` is granted `role`.
     *
     * `sender` is the account that originated the contract call, an admin role
     * bearer except when using {_setupRole}.
     */
    event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Emitted when `account` is revoked `role`.
     *
     * `sender` is the account that originated the contract call:
     *   - if using `revokeRole`, it is the admin role bearer
     *   - if using `renounceRole`, it is the role bearer (i.e. `account`)
     */
    event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Returns `true` if `account` has been granted `role`.
     */
    function hasRole(bytes32 role, address account) public view returns (bool) {
        return _roles[role].members.contains(account);
    }

    /**
     * @dev Returns the number of accounts that have `role`. Can be used
     * together with {getRoleMember} to enumerate all bearers of a role.
     */
    function getRoleMemberCount(bytes32 role) public view returns (uint256) {
        return _roles[role].members.length();
    }

    /**
     * @dev Returns one of the accounts that have `role`. `index` must be a
     * value between 0 and {getRoleMemberCount}, non-inclusive.
     *
     * Role bearers are not sorted in any particular way, and their ordering may
     * change at any point.
     *
     * WARNING: When using {getRoleMember} and {getRoleMemberCount}, make sure
     * you perform all queries on the same block. See the following
     * https://forum.openzeppelin.com/t/iterating-over-elements-on-enumerableset-in-openzeppelin-contracts/2296[forum post]
     * for more information.
     */
    function getRoleMember(bytes32 role, uint256 index) public view returns (address) {
        return _roles[role].members.at(index);
    }

    /**
     * @dev Returns the admin role that controls `role`. See {grantRole} and
     * {revokeRole}.
     *
     * To change a role's admin, use {_setRoleAdmin}.
     */
    function getRoleAdmin(bytes32 role) public view returns (bytes32) {
        return _roles[role].adminRole;
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function grantRole(bytes32 role, address account) public virtual {
        require(hasRole(_roles[role].adminRole, _msgSender()), "AccessControl: sender must be an admin to grant");

        _grantRole(role, account);
    }

    /**
     * @dev Revokes `role` from `account`.
     *
     * If `account` had been granted `role`, emits a {RoleRevoked} event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function revokeRole(bytes32 role, address account) public virtual {
        require(hasRole(_roles[role].adminRole, _msgSender()), "AccessControl: sender must be an admin to revoke");

        _revokeRole(role, account);
    }

    /**
     * @dev Revokes `role` from the calling account.
     *
     * Roles are often managed via {grantRole} and {revokeRole}: this function's
     * purpose is to provide a mechanism for accounts to lose their privileges
     * if they are compromised (such as when a trusted device is misplaced).
     *
     * If the calling account had been granted `role`, emits a {RoleRevoked}
     * event.
     *
     * Requirements:
     *
     * - the caller must be `account`.
     */
    function renounceRole(bytes32 role, address account) public virtual {
        require(account == _msgSender(), "AccessControl: can only renounce roles for self");

        _revokeRole(role, account);
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event. Note that unlike {grantRole}, this function doesn't perform any
     * checks on the calling account.
     *
     * [WARNING]
     * ====
     * This function should only be called from the constructor when setting
     * up the initial roles for the system.
     *
     * Using this function in any other way is effectively circumventing the admin
     * system imposed by {AccessControl}.
     * ====
     */
    function _setupRole(bytes32 role, address account) internal virtual {
        _grantRole(role, account);
    }

    /**
     * @dev Sets `adminRole` as ``role``'s admin role.
     *
     * Emits a {RoleAdminChanged} event.
     */
    function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
        emit RoleAdminChanged(role, _roles[role].adminRole, adminRole);
        _roles[role].adminRole = adminRole;
    }

    function _grantRole(bytes32 role, address account) private {
        if (_roles[role].members.add(account)) {
            emit RoleGranted(role, account, _msgSender());
        }
    }

    function _revokeRole(bytes32 role, address account) private {
        if (_roles[role].members.remove(account)) {
            emit RoleRevoked(role, account, _msgSender());
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Standard math utilities missing in the Solidity language.
 */
library Math {
    /**
     * @dev Returns the largest of two numbers.
     */
    function max(uint256 a, uint256 b) internal pure returns (uint256) {
        return a >= b ? a : b;
    }

    /**
     * @dev Returns the smallest of two numbers.
     */
    function min(uint256 a, uint256 b) internal pure returns (uint256) {
        return a < b ? a : b;
    }

    /**
     * @dev Returns the average of two numbers. The result is rounded towards
     * zero.
     */
    function average(uint256 a, uint256 b) internal pure returns (uint256) {
        // (a + b) / 2 can overflow, so we distribute
        return (a / 2) + (b / 2) + ((a % 2 + b % 2) / 2);
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

import "./IERC20.sol";
import "../../math/SafeMath.sol";
import "../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;

    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require((value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(value);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) { // Return data is optional
            // solhint-disable-next-line max-line-length
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.2 <0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: value }(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Library for managing
 * https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
 * types.
 *
 * Sets have the following properties:
 *
 * - Elements are added, removed, and checked for existence in constant time
 * (O(1)).
 * - Elements are enumerated in O(n). No guarantees are made on the ordering.
 *
 * ```
 * contract Example {
 *     // Add the library methods
 *     using EnumerableSet for EnumerableSet.AddressSet;
 *
 *     // Declare a set state variable
 *     EnumerableSet.AddressSet private mySet;
 * }
 * ```
 *
 * As of v3.3.0, sets of type `bytes32` (`Bytes32Set`), `address` (`AddressSet`)
 * and `uint256` (`UintSet`) are supported.
 */
library EnumerableSet {
    // To implement this library for multiple types with as little code
    // repetition as possible, we write it in terms of a generic Set type with
    // bytes32 values.
    // The Set implementation uses private functions, and user-facing
    // implementations (such as AddressSet) are just wrappers around the
    // underlying Set.
    // This means that we can only create new EnumerableSets for types that fit
    // in bytes32.

    struct Set {
        // Storage of set values
        bytes32[] _values;

        // Position of the value in the `values` array, plus 1 because index 0
        // means a value is not in the set.
        mapping (bytes32 => uint256) _indexes;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function _add(Set storage set, bytes32 value) private returns (bool) {
        if (!_contains(set, value)) {
            set._values.push(value);
            // The value is stored at length-1, but we add 1 to all indexes
            // and use 0 as a sentinel value
            set._indexes[value] = set._values.length;
            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function _remove(Set storage set, bytes32 value) private returns (bool) {
        // We read and store the value's index to prevent multiple reads from the same storage slot
        uint256 valueIndex = set._indexes[value];

        if (valueIndex != 0) { // Equivalent to contains(set, value)
            // To delete an element from the _values array in O(1), we swap the element to delete with the last one in
            // the array, and then remove the last element (sometimes called as 'swap and pop').
            // This modifies the order of the array, as noted in {at}.

            uint256 toDeleteIndex = valueIndex - 1;
            uint256 lastIndex = set._values.length - 1;

            // When the value to delete is the last one, the swap operation is unnecessary. However, since this occurs
            // so rarely, we still do the swap anyway to avoid the gas cost of adding an 'if' statement.

            bytes32 lastvalue = set._values[lastIndex];

            // Move the last value to the index where the value to delete is
            set._values[toDeleteIndex] = lastvalue;
            // Update the index for the moved value
            set._indexes[lastvalue] = toDeleteIndex + 1; // All indexes are 1-based

            // Delete the slot where the moved value was stored
            set._values.pop();

            // Delete the index for the deleted slot
            delete set._indexes[value];

            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function _contains(Set storage set, bytes32 value) private view returns (bool) {
        return set._indexes[value] != 0;
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function _length(Set storage set) private view returns (uint256) {
        return set._values.length;
    }

   /**
    * @dev Returns the value stored at position `index` in the set. O(1).
    *
    * Note that there are no guarantees on the ordering of values inside the
    * array, and it may change when more values are added or removed.
    *
    * Requirements:
    *
    * - `index` must be strictly less than {length}.
    */
    function _at(Set storage set, uint256 index) private view returns (bytes32) {
        require(set._values.length > index, "EnumerableSet: index out of bounds");
        return set._values[index];
    }

    // Bytes32Set

    struct Bytes32Set {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _add(set._inner, value);
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(Bytes32Set storage set, bytes32 value) internal returns (bool) {
        return _remove(set._inner, value);
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(Bytes32Set storage set, bytes32 value) internal view returns (bool) {
        return _contains(set._inner, value);
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(Bytes32Set storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

   /**
    * @dev Returns the value stored at position `index` in the set. O(1).
    *
    * Note that there are no guarantees on the ordering of values inside the
    * array, and it may change when more values are added or removed.
    *
    * Requirements:
    *
    * - `index` must be strictly less than {length}.
    */
    function at(Bytes32Set storage set, uint256 index) internal view returns (bytes32) {
        return _at(set._inner, index);
    }

    // AddressSet

    struct AddressSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(AddressSet storage set, address value) internal returns (bool) {
        return _add(set._inner, bytes32(uint256(value)));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(AddressSet storage set, address value) internal returns (bool) {
        return _remove(set._inner, bytes32(uint256(value)));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(AddressSet storage set, address value) internal view returns (bool) {
        return _contains(set._inner, bytes32(uint256(value)));
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(AddressSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

   /**
    * @dev Returns the value stored at position `index` in the set. O(1).
    *
    * Note that there are no guarantees on the ordering of values inside the
    * array, and it may change when more values are added or removed.
    *
    * Requirements:
    *
    * - `index` must be strictly less than {length}.
    */
    function at(AddressSet storage set, uint256 index) internal view returns (address) {
        return address(uint256(_at(set._inner, index)));
    }


    // UintSet

    struct UintSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(UintSet storage set, uint256 value) internal returns (bool) {
        return _add(set._inner, bytes32(value));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(UintSet storage set, uint256 value) internal returns (bool) {
        return _remove(set._inner, bytes32(value));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(UintSet storage set, uint256 value) internal view returns (bool) {
        return _contains(set._inner, bytes32(value));
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function length(UintSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

   /**
    * @dev Returns the value stored at position `index` in the set. O(1).
    *
    * Note that there are no guarantees on the ordering of values inside the
    * array, and it may change when more values are added or removed.
    *
    * Requirements:
    *
    * - `index` must be strictly less than {length}.
    */
    function at(UintSet storage set, uint256 index) internal view returns (uint256) {
        return uint256(_at(set._inner, index));
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

import "../GSN/Context.sol";

/**
 * @dev Contract module which allows children to implement an emergency stop
 * mechanism that can be triggered by an authorized account.
 *
 * This module is used through inheritance. It will make available the
 * modifiers `whenNotPaused` and `whenPaused`, which can be applied to
 * the functions of your contract. Note that they will not be pausable by
 * simply including this module, only once the modifiers are put in place.
 */
abstract contract Pausable is Context {
    /**
     * @dev Emitted when the pause is triggered by `account`.
     */
    event Paused(address account);

    /**
     * @dev Emitted when the pause is lifted by `account`.
     */
    event Unpaused(address account);

    bool private _paused;

    /**
     * @dev Initializes the contract in unpaused state.
     */
    constructor () internal {
        _paused = false;
    }

    /**
     * @dev Returns true if the contract is paused, and false otherwise.
     */
    function paused() public view returns (bool) {
        return _paused;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is not paused.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    modifier whenNotPaused() {
        require(!_paused, "Pausable: paused");
        _;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is paused.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    modifier whenPaused() {
        require(_paused, "Pausable: not paused");
        _;
    }

    /**
     * @dev Triggers stopped state.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    function _pause() internal virtual whenNotPaused {
        _paused = true;
        emit Paused(_msgSender());
    }

    /**
     * @dev Returns to normal state.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    function _unpause() internal virtual whenPaused {
        _paused = false;
        emit Unpaused(_msgSender());
    }
}

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor () internal {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and make it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        // On the first call to nonReentrant, _notEntered will be true
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;

        _;

        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.7.0;

import "@openzeppelin/contracts/access/AccessControl.sol";
import "@openzeppelin/contracts/GSN/Context.sol";

abstract contract RewardDistributionRecipient is Context, AccessControl {
    bytes32 public constant DISTRIBUTION_ASSIGNER_ROLE = keccak256("DISTRIBUTION_ASSIGNER_ROLE");

    address public rewardDistribution;

    constructor(address assigner) {
        _setupRole(DISTRIBUTION_ASSIGNER_ROLE, assigner);
    }

    modifier onlyRewardDistribution() {
        require(
            _msgSender() == rewardDistribution,
            "RewardDisributionRecipient::onlyRewardDistribution: Caller is not RewardsDistribution contract"
        );
        _;
    }

    /* ========== RESTRICTED FUNCTIONS ========== */

    /* ----- rewardDistribution ----- */

    function notifyRewardAmount(uint256 reward) external virtual;

    /* ----- DISTRIBUTION_ASSIGNER_ROLE ----- */

    function setRewardDistribution(address _rewardDistribution)
        external
    {
        require(
            hasRole(DISTRIBUTION_ASSIGNER_ROLE, _msgSender()),
            "RewardDistributionRecipient::setRewardDistribution: must have distribution assigner role"
        );
        rewardDistribution = _rewardDistribution;
    }
}

// SPDX-License-Identifier: MIT
pragma solidity ^0.7.0;

interface IETHStakingRewards {
    // Views
    function lastTimeRewardApplicable() external view returns (uint256);
    function rewardPerToken() external view returns (uint256);
    function earned(address account) external view returns (uint256);
    function getRewardForDuration() external view returns (uint256);
    function totalSupply() external view returns (uint256);
    function balanceOf(address account) external view returns (uint256);

    // Mutative
    function stake(uint256 amount) external payable;
    function withdraw(uint256 amount) external;
    function getReward() external;
    function exit() external;
}

{
  "evmVersion": "istanbul",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs",
    "useLiteralContent": true
  },
  "optimizer": {
    "enabled": true,
    "runs": 999999
  },
  "remappings": [],
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "abi"
      ]
    }
  }
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"address","name":"_admin","type":"address"},{"internalType":"address","name":"_rewardDistribution","type":"address"},{"internalType":"address","name":"_rewardToken","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"token","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"Recovered","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"reward","type":"uint256"}],"name":"RewardAdded","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":false,"internalType":"uint256","name":"reward","type":"uint256"}],"name":"RewardPaid","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"bytes32","name":"previousAdminRole","type":"bytes32"},{"indexed":true,"internalType":"bytes32","name":"newAdminRole","type":"bytes32"}],"name":"RoleAdminChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":true,"internalType":"address","name":"sender","type":"address"}],"name":"RoleGranted","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"bytes32","name":"role","type":"bytes32"},{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":true,"internalType":"address","name":"sender","type":"address"}],"name":"RoleRevoked","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"Staked","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"Withdrawn","type":"event"},{"inputs":[],"name":"DEFAULT_ADMIN_ROLE","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"DISTRIBUTION_ASSIGNER_ROLE","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"DURATION","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"RECOVER_ROLE","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"balanceOf","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"account","type":"address"}],"name":"earned","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"exit","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"getReward","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"getRewardForDuration","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"}],"name":"getRoleAdmin","outputs":[{"internalType":"bytes32","name":"","type":"bytes32"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"uint256","name":"index","type":"uint256"}],"name":"getRoleMember","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"}],"name":"getRoleMemberCount","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"grantRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"hasRole","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"lastTimeRewardApplicable","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"lastUpdateTime","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"reward","type":"uint256"}],"name":"notifyRewardAmount","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"periodFinish","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"tokenAddress","type":"address"},{"internalType":"uint256","name":"tokenAmount","type":"uint256"}],"name":"recoverERC20","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"renounceRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"bytes32","name":"role","type":"bytes32"},{"internalType":"address","name":"account","type":"address"}],"name":"revokeRole","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"rewardDistribution","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"rewardPerToken","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"rewardPerTokenStored","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"rewardRate","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"rewardToken","outputs":[{"internalType":"contract IERC20","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"rewards","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"_rewardDistribution","type":"address"}],"name":"setRewardDistribution","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"stake","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[],"name":"totalSupply","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"}],"name":"userRewardPerTokenPaid","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"withdraw","outputs":[],"stateMutability":"nonpayable","type":"function"},{"stateMutability":"payable","type":"receive"}]

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

000000000000000000000000de4b9cbad10cdff96ee4b1f9c7568283e96c0089000000000000000000000000383df49ad1f0219759a46399fe33cb7a63cd051c00000000000000000000000024a6a37576377f63f194caa5f518a60f45b42921

-----Decoded View---------------
Arg [0] : _admin (address): 0xdE4B9cBaD10cdFf96eE4b1f9C7568283e96C0089
Arg [1] : _rewardDistribution (address): 0x383dF49ad1f0219759a46399fE33Cb7A63cd051c
Arg [2] : _rewardToken (address): 0x24A6A37576377F63f194Caa5F518a60f45b42921

-----Encoded View---------------
3 Constructor Arguments found :
Arg [0] : 000000000000000000000000de4b9cbad10cdff96ee4b1f9c7568283e96c0089
Arg [1] : 000000000000000000000000383df49ad1f0219759a46399fe33cb7a63cd051c
Arg [2] : 00000000000000000000000024a6a37576377f63f194caa5f518a60f45b42921